[PATCH] pinctrl: qcom: sc7180: Add missing tile info in SDC_QDSD_PINGROUP/UFS_RESET

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The SDC_QDSD_PINGROUP/UFS_RESET macros are missing the .tile info needed to
calculate the right register offsets. Adding them here and also
adjusting the offsets accordingly.

Fixes: f2ae04c45b1a ("pinctrl: qcom: Add SC7180 pinctrl driver")

Reported-by: Veerabhadrarao Badiganti <vbadigan@xxxxxxxxxxxxxx>
Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
---
 drivers/pinctrl/qcom/pinctrl-sc7180.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-sc7180.c b/drivers/pinctrl/qcom/pinctrl-sc7180.c
index 6399c8a2bc22..d6cfad7417b1 100644
--- a/drivers/pinctrl/qcom/pinctrl-sc7180.c
+++ b/drivers/pinctrl/qcom/pinctrl-sc7180.c
@@ -77,6 +77,7 @@ enum {
 		.intr_cfg_reg = 0,			\
 		.intr_status_reg = 0,			\
 		.intr_target_reg = 0,			\
+		.tile = SOUTH,				\
 		.mux_bit = -1,				\
 		.pull_bit = pull,			\
 		.drv_bit = drv,				\
@@ -102,6 +103,7 @@ enum {
 		.intr_cfg_reg = 0,			\
 		.intr_status_reg = 0,			\
 		.intr_target_reg = 0,			\
+		.tile = SOUTH,				\
 		.mux_bit = -1,				\
 		.pull_bit = 3,				\
 		.drv_bit = 0,				\
@@ -1087,14 +1089,14 @@ static const struct msm_pingroup sc7180_groups[] = {
 	[116] = PINGROUP(116, WEST, qup04, qup04, _, _, _, _, _, _, _),
 	[117] = PINGROUP(117, WEST, dp_hot, _, _, _, _, _, _, _, _),
 	[118] = PINGROUP(118, WEST, _, _, _, _, _, _, _, _, _),
-	[119] = UFS_RESET(ufs_reset, 0x97f000),
-	[120] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x97a000, 15, 0),
-	[121] = SDC_QDSD_PINGROUP(sdc1_clk, 0x97a000, 13, 6),
-	[122] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x97a000, 11, 3),
-	[123] = SDC_QDSD_PINGROUP(sdc1_data, 0x97a000, 9, 0),
-	[124] = SDC_QDSD_PINGROUP(sdc2_clk, 0x97b000, 14, 6),
-	[125] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x97b000, 11, 3),
-	[126] = SDC_QDSD_PINGROUP(sdc2_data, 0x97b000, 9, 0),
+	[119] = UFS_RESET(ufs_reset, 0x7f000),
+	[120] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x7a000, 15, 0),
+	[121] = SDC_QDSD_PINGROUP(sdc1_clk, 0x7a000, 13, 6),
+	[122] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x7a000, 11, 3),
+	[123] = SDC_QDSD_PINGROUP(sdc1_data, 0x7a000, 9, 0),
+	[124] = SDC_QDSD_PINGROUP(sdc2_clk, 0x7b000, 14, 6),
+	[125] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x7b000, 11, 3),
+	[126] = SDC_QDSD_PINGROUP(sdc2_data, 0x7b000, 9, 0),
 };
 
 static const struct msm_pinctrl_soc_data sc7180_pinctrl = {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux