Prior refactoring have left a few root nodes scattered throughout
db820c.dtsi, group these at the top of the file.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 94 ++++++++++----------
1 file changed, 45 insertions(+), 49 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index fc6273b0215d..aed34a461b19 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -77,6 +77,51 @@
enable-gpios = <&pm8994_gpios 15 0>;
};
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&volume_up_gpio>;
+
+ button@0 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb2_id: usb2-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_vbus_det_gpio>;
+ };
+
+ usb3_id: usb3-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_vbus_det_gpio>;
+ };
+
+ wlan_en: wlan-en-1-8v {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_en_gpios>;
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&pm8994_gpios 8 0>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
};
&blsp1_uart1 {
@@ -497,24 +542,6 @@
core-vcc-supply = <&pm8994_s4>;
};
-/ {
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
-
- pinctrl-names = "default";
- pinctrl-0 = <&volume_up_gpio>;
-
- button@0 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
&rpm_requests {
pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
@@ -671,37 +698,6 @@
};
};
-/ {
- usb2_id: usb2-id {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_vbus_det_gpio>;
- };
-
- usb3_id: usb3-id {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb3_vbus_det_gpio>;
- };
-
- wlan_en: wlan-en-1-8v {
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_en_gpios>;
- compatible = "regulator-fixed";
- regulator-name = "wlan-en-regulator";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- gpio = <&pm8994_gpios 8 0>;
-
- /* WLAN card specific delay */
- startup-delay-us = <70000>;
- enable-active-high;
- };
-};
-
&spmi_bus {
pmic@0 {
pon@800 {
--
2.23.0
