On 2019-09-19 23:51, Stephen Boyd wrote:
Quoting Akash Asthana (2019-09-19 00:16:06)
Add system wakeup capability over UART RX line for wakeup capable
UART.
When system is suspended, RX line act as an interrupt to wakeup system
for any communication requests from peer.
Cleanup of IRQ registration, moving it to probe from startup function.
Probably should be a different patch than the one that adds wakeup irq
handling.
Sure, will do it.
Signed-off-by: Akash Asthana <akashast@xxxxxxxxxxxxxx>
---
drivers/tty/serial/qcom_geni_serial.c | 73
+++++++++++++++++++++++++++++------
1 file changed, 62 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c
b/drivers/tty/serial/qcom_geni_serial.c
index 35e5f9c..43d1da4 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -19,6 +19,8 @@
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/irq.h>
Can you sort these includes alphabetically? Or at least attempt to
place
this somewhere in there alphabetically?
ok
/* UART specific GENI registers */
#define SE_UART_LOOPBACK_CFG 0x22c
@@ -98,6 +100,8 @@
#define CONSOLE_RX_BYTES_PW 4
#endif
+#define WAKEUP_EVENT_MSEC 2000
This is used one place. Just inline it and drop this define.
ok
+
struct qcom_geni_serial_port {
struct uart_port uport;
struct geni_se se;
@@ -115,6 +119,7 @@ struct qcom_geni_serial_port {
bool brk;
unsigned int tx_remaining;
+ int wakeup_irq;
};
static const struct uart_ops qcom_geni_console_pops;
@@ -756,6 +761,15 @@ static void qcom_geni_serial_handle_tx(struct
uart_port *uport, bool done,
uart_write_wakeup(uport);
}
+static irqreturn_t qcom_geni_serial_wakeup_isr(int isr, void *dev)
+{
+ struct uart_port *uport = dev;
+
+ pm_wakeup_event(uport->dev, WAKEUP_EVENT_MSEC);
+
+ return IRQ_HANDLED;
+}
+
static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
{
u32 m_irq_en;
@@ -1290,6 +1297,8 @@ static int qcom_geni_serial_probe(struct
platform_device *pdev)
port->rx_fifo_depth = DEF_FIFO_DEPTH_WORDS;
port->tx_fifo_width = DEF_FIFO_WIDTH_BITS;
+ scnprintf(port->name, sizeof(port->name),
"qcom_geni_serial_%s%d",
+ (uart_console(uport) ? "console" : "uart"),
uport->line);
This looks like an unrelated change?
We moved this change to probe from startup as part of IRQ cleanup. We
are initializing port->name variable here that is used in
devm_request_irq call.
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "Failed to get IRQ %d\n", irq);
@@ -1297,6 +1306,39 @@ static int qcom_geni_serial_probe(struct
platform_device *pdev)
}
uport->irq = irq;
+ irq_set_status_flags(uport->irq, IRQ_NOAUTOEN);
+ ret = devm_request_irq(uport->dev, uport->irq,
qcom_geni_serial_isr,
+ IRQF_TRIGGER_HIGH, port->name, uport);
+ if (ret) {
+ dev_err(uport->dev, "Failed to get IRQ ret %d\n",
ret);
+ return ret;
+ }
+
+ if (!console) {
+ port->wakeup_irq = platform_get_irq(pdev, 1);
Can you use dev_pm_set_wake_irq() instead?
okay, we are using this API this will take care of
enable_irq_wake/disable_irq_wake during suspend and resume but still, we
need to enable/disable wakeup irq in suspend and resume call.
+ if (port->wakeup_irq < 0) {
+ dev_err(&pdev->dev, "Failed to get wakeup IRQ
%d\n",
+
port->wakeup_irq);
+ } else {
+ dev_info(&pdev->dev, "wakeup_irq =%d\n",
+ port->wakeup_irq);
Please no dev_info() messages like this.
ok
+ irq_set_status_flags(port->wakeup_irq,
IRQ_NOAUTOEN);
+ ret = devm_request_irq(uport->dev,
port->wakeup_irq,
+ qcom_geni_serial_wakeup_isr,
+ IRQF_TRIGGER_FALLING, "uart_wakeup",
uport);
+ if (ret) {
+ dev_err(uport->dev, "Failed to
register wakeup "
+ "IRQ ret %d\n", ret);
Don't split format strings across many lines. The arguments can go to a
different line, but the string can be on a single line.
ok
+ return ret;
+ }
+
+ device_init_wakeup(&pdev->dev, true);
+ ret = enable_irq_wake(port->wakeup_irq);
+ if (unlikely(ret))
+ dev_err(uport->dev, "%s:Failed to set
IRQ "
+ "wake:%d\n", __func__, ret);
+ }
+ }
uport->private_data = drv;
platform_set_drvdata(pdev, port);
port->handle_rx = console ? handle_rx_console :
handle_rx_uart;
@@ -1311,6 +1353,7 @@ static int qcom_geni_serial_remove(struct
platform_device *pdev)
struct uart_driver *drv = port->uport.private_data;
uart_remove_one_port(drv, &port->uport);
+
return 0;
}
This hunk shouldn't be here. Please drop
ok