Re: [PATCH -next] soc: qcom: Fix llcc-qcom definitions to include

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 08 Oct 00:16 PDT 2019, YueHaibing wrote:

> commit 99356b03b431 ("soc: qcom: Make llcc-qcom a
> generic driver") move these out of llcc-qcom.h, make
> the building fails:
> 
> drivers/edac/qcom_edac.c:86:40: error: array type has incomplete element type struct llcc_edac_reg_data
>  static const struct llcc_edac_reg_data edac_reg_data[] = {
>                                         ^~~~~~~~~~~~~
> drivers/edac/qcom_edac.c:87:3: error: array index in non-array initializer
>   [LLCC_DRAM_CE] = {
>    ^~~~~~~~~~~~
> drivers/edac/qcom_edac.c:87:3: note: (near initialization for edac_reg_data)
> drivers/edac/qcom_edac.c:88:3: error: field name not in record or union initializer
>    .name = "DRAM Single-bit",
> ...
> drivers/edac/qcom_edac.c:169:51: warning: struct llcc_drv_data declared inside parameter
>  list will not be visible outside of this definition or declaration
>  qcom_llcc_clear_error_status(int err_type, struct llcc_drv_data *drv)
>                                                    ^~~~~~~~~~~~~
> 
> This patch move the needed definitions back to include.
> 
> Reported-by: Hulk Robot <hulkci@xxxxxxxxxx>
> Fixes: 99356b03b431 ("soc: qcom: Make llcc-qcom a generic driver")
> Signed-off-by: YueHaibing <yuehaibing@xxxxxxxxxx>

Sorry for missing this, thanks for the fix YueHaibing!

Regards,
Bjorn

> ---
>  drivers/soc/qcom/llcc-qcom.c       | 50 --------------------------------------
>  include/linux/soc/qcom/llcc-qcom.h | 50 ++++++++++++++++++++++++++++++++++++++
>  2 files changed, 50 insertions(+), 50 deletions(-)
> 
> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
> index 98563ef..43606736 100644
> --- a/drivers/soc/qcom/llcc-qcom.c
> +++ b/drivers/soc/qcom/llcc-qcom.c
> @@ -86,56 +86,6 @@ struct llcc_slice_config {
>  	bool activate_on_init;
>  };
>  
> -/**
> - * llcc_drv_data - Data associated with the llcc driver
> - * @regmap: regmap associated with the llcc device
> - * @bcast_regmap: regmap associated with llcc broadcast offset
> - * @cfg: pointer to the data structure for slice configuration
> - * @lock: mutex associated with each slice
> - * @cfg_size: size of the config data table
> - * @max_slices: max slices as read from device tree
> - * @num_banks: Number of llcc banks
> - * @bitmap: Bit map to track the active slice ids
> - * @offsets: Pointer to the bank offsets array
> - * @ecc_irq: interrupt for llcc cache error detection and reporting
> - */
> -struct llcc_drv_data {
> -	struct regmap *regmap;
> -	struct regmap *bcast_regmap;
> -	const struct llcc_slice_config *cfg;
> -	struct mutex lock;
> -	u32 cfg_size;
> -	u32 max_slices;
> -	u32 num_banks;
> -	unsigned long *bitmap;
> -	u32 *offsets;
> -	int ecc_irq;
> -};
> -
> -/**
> - * llcc_edac_reg_data - llcc edac registers data for each error type
> - * @name: Name of the error
> - * @synd_reg: Syndrome register address
> - * @count_status_reg: Status register address to read the error count
> - * @ways_status_reg: Status register address to read the error ways
> - * @reg_cnt: Number of registers
> - * @count_mask: Mask value to get the error count
> - * @ways_mask: Mask value to get the error ways
> - * @count_shift: Shift value to get the error count
> - * @ways_shift: Shift value to get the error ways
> - */
> -struct llcc_edac_reg_data {
> -	char *name;
> -	u64 synd_reg;
> -	u64 count_status_reg;
> -	u64 ways_status_reg;
> -	u32 reg_cnt;
> -	u32 count_mask;
> -	u32 ways_mask;
> -	u8  count_shift;
> -	u8  ways_shift;
> -};
> -
>  struct qcom_llcc_config {
>  	const struct llcc_slice_config *sct_data;
>  	int size;
> diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
> index c0acdb2..90b8646 100644
> --- a/include/linux/soc/qcom/llcc-qcom.h
> +++ b/include/linux/soc/qcom/llcc-qcom.h
> @@ -37,6 +37,56 @@ struct llcc_slice_desc {
>  	size_t slice_size;
>  };
>  
> +/**
> + * llcc_edac_reg_data - llcc edac registers data for each error type
> + * @name: Name of the error
> + * @synd_reg: Syndrome register address
> + * @count_status_reg: Status register address to read the error count
> + * @ways_status_reg: Status register address to read the error ways
> + * @reg_cnt: Number of registers
> + * @count_mask: Mask value to get the error count
> + * @ways_mask: Mask value to get the error ways
> + * @count_shift: Shift value to get the error count
> + * @ways_shift: Shift value to get the error ways
> + */
> +struct llcc_edac_reg_data {
> +	char *name;
> +	u64 synd_reg;
> +	u64 count_status_reg;
> +	u64 ways_status_reg;
> +	u32 reg_cnt;
> +	u32 count_mask;
> +	u32 ways_mask;
> +	u8  count_shift;
> +	u8  ways_shift;
> +};
> +
> +/**
> + * llcc_drv_data - Data associated with the llcc driver
> + * @regmap: regmap associated with the llcc device
> + * @bcast_regmap: regmap associated with llcc broadcast offset
> + * @cfg: pointer to the data structure for slice configuration
> + * @lock: mutex associated with each slice
> + * @cfg_size: size of the config data table
> + * @max_slices: max slices as read from device tree
> + * @num_banks: Number of llcc banks
> + * @bitmap: Bit map to track the active slice ids
> + * @offsets: Pointer to the bank offsets array
> + * @ecc_irq: interrupt for llcc cache error detection and reporting
> + */
> +struct llcc_drv_data {
> +	struct regmap *regmap;
> +	struct regmap *bcast_regmap;
> +	const struct llcc_slice_config *cfg;
> +	struct mutex lock;
> +	u32 cfg_size;
> +	u32 max_slices;
> +	u32 num_banks;
> +	unsigned long *bitmap;
> +	u32 *offsets;
> +	int ecc_irq;
> +};
> +
>  #if IS_ENABLED(CONFIG_QCOM_LLCC)
>  /**
>   * llcc_slice_getd - get llcc slice descriptor
> -- 
> 2.7.4
> 
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux