Update simple-pm-bus node name from 'agnoc' to 'bus' reflecting the
proposed binding description in json-schema which in turn reflects the
Devicetree specification [1] v0.3-rc2.
"The name of a node should be somewhat generic, reflecting the function
of the device and not its precise programming model. If appropriate,
the name should be one of the following choices:
...
* bus
..."
Also drop the unit address as there is neither a reg property nor
non-empty ranges.
[1] https://www.devicetree.org/specifications/
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
*** Compile tested only ***
v4
* Update changelog
* Update reference in apq8096-db820c.dtsi
v3
* v2 was miss-posted as v3
v2
* New patch
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 04ad2fb22b9a..5a2297777592 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -439,7 +439,7 @@
enable-active-high;
};
- agnoc@0 {
+ bus {
pcie@600000 {
status = "okay";
perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 96c0a481f454..99f376ebd27e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1373,7 +1373,7 @@
clock-names = "iface", "bus";
};
- agnoc@0 {
+ bus {
power-domains = <&gcc AGGRE0_NOC_GDSC>;
compatible = "simple-pm-bus";
#address-cells = <1>;
--
2.11.0
