[PATCH] arm64: dts: qcom: c630: Enable adsp, cdsp and mpss

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Specify the firmware-name for the adsp, cdsp and mpss and enable the
nodes.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
 .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts      | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index ded120d3aef5..d3c841628d66 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -20,6 +20,11 @@
 	};
 };
 
+&adsp_pas {
+	firmware-name = "qcom/c630/qcadsp850.mbn";
+	status = "okay";
+};
+
 &apps_rsc {
 	pm8998-rpmh-regulators {
 		compatible = "qcom,pm8998-rpmh-regulators";
@@ -229,6 +234,11 @@
 	status = "disabled";
 };
 
+&cdsp_pas {
+	firmware-name = "qcom/c630/qccdsp850.mbn";
+	status = "okay";
+};
+
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
@@ -296,6 +306,10 @@
 	};
 };
 
+&mss_pil {
+	firmware-name = "qcom/c630/qcdsp1v2850.mbn", "qcom/c630/qcdsp2850.mbn";
+};
+
 &qup_i2c12_default {
 	drive-strength = <2>;
 	bias-disable;
-- 
2.18.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux