Re: [PATCH 1/3] dt-bindings: Introduce interconnect bindings for usb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 11, 2019 at 10:24:33AM +0530, Chandana Kishori Chiluveru wrote:
> Add documentation for the interconnects and interconnect-names
> bindings for USB as detailed by bindings/interconnect/interconnect.txt.

This isn't a generic binding for USB, but for the qcom,dwc3, the
commit message (including subject) should reflect this.

nit: you might want to replace 'bindings' with 'properties'.

> Signed-off-by: Chandana Kishori Chiluveru <cchiluve@xxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/usb/qcom,dwc3.txt | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> index cb695aa..7e9cb97 100644
> --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> @@ -33,6 +33,16 @@ Optional clocks:
>  
>  Optional properties:
>  - resets:		Phandle to reset control that resets core and wrapper.
> +- interconnects:	Pairs of phandles and interconnect provider specifier

consistency nit: should be either 'phandle' & 'specifier' or
'phandles' & 'specifiers'.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux