Re: [PATCH v2 1/1] arm64: dts: qcom: Add Lenovo Yoga C630

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04-09-19, 12:39, Lee Jones wrote:
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -12,5 +12,6 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb

Can we keep this sorted, so before mtp.

>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> new file mode 100644
> index 000000000000..ad160c718b33
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> @@ -0,0 +1,454 @@
> +// SPDX-License-Identifier: GPL-2.0

Are we going to make this dual? or BSD..

> +&apps_rsc {
> +	pm8998-rpmh-regulators {
> +		compatible = "qcom,pm8998-rpmh-regulators";
> +		qcom,pmic-id = "a";
> +
> +		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
> +		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
> +
> +		vreg_s2a_1p125: smps2 {
> +		};
> +
> +		vreg_s3a_1p35: smps3 {
> +			regulator-min-microvolt = <1352000>;
> +			regulator-max-microvolt = <1352000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_s4a_1p8: smps4 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_s5a_2p04: smps5 {
> +			regulator-min-microvolt = <2040000>;
> +			regulator-max-microvolt = <2040000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_s7a_1p025: smps7 {

Any reason why we dont specify the mode and min/max voltage for this
and few others below..?

> +&i2c1 {
> +	status = "okay";
> +	clock-frequency = <400000>;
> +	qcom,geni-se-fifo;
> +
> +	battery@70 {
> +		compatible = "some,battery";

some,battery ..?

> +&qup_i2c12_default {

Please move the qup nodes up so that nodes are sorted alphabetically

-- 
~Vinod



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux