Re: [PATCH 1/1] arm64: dts: qcom: Add Lenovo Yoga C630

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon 02 Sep 06:24 PDT 2019, Lee Jones wrote:

> From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> 
> The Lenovo Yoga C630 is built on the SDM850 from Qualcomm, but this seem
> to be similar enough to the SDM845 that we can reuse the sdm845.dtsi.
> 
> Supported by this patch is: keyboard, battery monitoring, UFS storage,
> USB host and Bluetooth.

Applied this to next-20190829 and booted it, got a little bit of EFI FB,
then the screen goes blank and after a while I'm back in GRUB.

I've not been able to figure out what's causing this though.

Regards,
Bjorn

> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 450 ++++++++++++++++++
>  2 files changed, 451 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 0a7e5dfce6f7..670c6c65f9e9 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -12,5 +12,6 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> new file mode 100644
> index 000000000000..3177b054035f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> @@ -0,0 +1,450 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Lenovo Yoga C630
> + *
> + * Copyright (c) 2019, Linaro Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sdm845.dtsi"
> +#include "pm8998.dtsi"
> +
> +/ {
> +	model = "Lenovo Yoga C630";
> +	compatible = "lenovo,yoga-c630", "qcom,sdm845";
> +
> +	aliases {
> +		hsuart0 = &uart6;
> +	};
> +};
> +
> +&apps_rsc {
> +	pm8998-rpmh-regulators {
> +		compatible = "qcom,pm8998-rpmh-regulators";
> +		qcom,pmic-id = "a";
> +
> +		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
> +		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
> +
> +		vreg_s2a_1p125: smps2 {
> +		};
> +
> +		vreg_s3a_1p35: smps3 {
> +			regulator-min-microvolt = <1352000>;
> +			regulator-max-microvolt = <1352000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_s4a_1p8: smps4 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_s5a_2p04: smps5 {
> +			regulator-min-microvolt = <2040000>;
> +			regulator-max-microvolt = <2040000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_s7a_1p025: smps7 {
> +		};
> +
> +		vdd_qusb_hs0:
> +		vdda_hp_pcie_core:
> +		vdda_mipi_csi0_0p9:
> +		vdda_mipi_csi1_0p9:
> +		vdda_mipi_csi2_0p9:
> +		vdda_mipi_dsi0_pll:
> +		vdda_mipi_dsi1_pll:
> +		vdda_qlink_lv:
> +		vdda_qlink_lv_ck:
> +		vdda_qrefs_0p875:
> +		vdda_pcie_core:
> +		vdda_pll_cc_ebi01:
> +		vdda_pll_cc_ebi23:
> +		vdda_sp_sensor:
> +		vdda_ufs1_core:
> +		vdda_ufs2_core:
> +		vdda_usb1_ss_core:
> +		vdda_usb2_ss_core:
> +		vreg_l1a_0p875: ldo1 {
> +			regulator-min-microvolt = <880000>;
> +			regulator-max-microvolt = <880000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vddpx_10:
> +		vreg_l2a_1p2: ldo2 {
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-always-on;
> +		};
> +
> +		vreg_l3a_1p0: ldo3 {
> +		};
> +
> +		vdd_wcss_cx:
> +		vdd_wcss_mx:
> +		vdda_wcss_pll:
> +		vreg_l5a_0p8: ldo5 {
> +			regulator-min-microvolt = <800000>;
> +			regulator-max-microvolt = <800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vddpx_13:
> +		vreg_l6a_1p8: ldo6 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l7a_1p8: ldo7 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l8a_1p2: ldo8 {
> +		};
> +
> +		vreg_l9a_1p8: ldo9 {
> +		};
> +
> +		vreg_l10a_1p8: ldo10 {
> +		};
> +
> +		vreg_l11a_1p0: ldo11 {
> +		};
> +
> +		vdd_qfprom:
> +		vdd_qfprom_sp:
> +		vdda_apc1_cs_1p8:
> +		vdda_gfx_cs_1p8:
> +		vdda_qrefs_1p8:
> +		vdda_qusb_hs0_1p8:
> +		vddpx_11:
> +		vreg_l12a_1p8: ldo12 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vddpx_2:
> +		vreg_l13a_2p95: ldo13 {
> +		};
> +
> +		vreg_l14a_1p88: ldo14 {
> +			regulator-min-microvolt = <1880000>;
> +			regulator-max-microvolt = <1880000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l15a_1p8: ldo15 {
> +		};
> +
> +		vreg_l16a_2p7: ldo16 {
> +		};
> +
> +		vreg_l17a_1p3: ldo17 {
> +			regulator-min-microvolt = <1304000>;
> +			regulator-max-microvolt = <1304000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l18a_2p7: ldo18 {
> +		};
> +
> +		vreg_l19a_3p0: ldo19 {
> +			regulator-min-microvolt = <3100000>;
> +			regulator-max-microvolt = <3108000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l20a_2p95: ldo20 {
> +			regulator-min-microvolt = <2960000>;
> +			regulator-max-microvolt = <2960000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l21a_2p95: ldo21 {
> +		};
> +
> +		vreg_l22a_2p85: ldo22 {
> +		};
> +
> +		vreg_l23a_3p3: ldo23 {
> +		};
> +
> +		vdda_qusb_hs0_3p1:
> +		vreg_l24a_3p075: ldo24 {
> +			regulator-min-microvolt = <3075000>;
> +			regulator-max-microvolt = <3083000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l25a_3p3: ldo25 {
> +			regulator-min-microvolt = <3104000>;
> +			regulator-max-microvolt = <3112000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vdda_hp_pcie_1p2:
> +		vdda_hv_ebi0:
> +		vdda_hv_ebi1:
> +		vdda_hv_ebi2:
> +		vdda_hv_ebi3:
> +		vdda_mipi_csi_1p25:
> +		vdda_mipi_dsi0_1p2:
> +		vdda_mipi_dsi1_1p2:
> +		vdda_pcie_1p2:
> +		vdda_ufs1_1p2:
> +		vdda_ufs2_1p2:
> +		vdda_usb1_ss_1p2:
> +		vdda_usb2_ss_1p2:
> +		vreg_l26a_1p2: ldo26 {
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1208000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l28a_3p0: ldo28 {
> +		};
> +
> +		vreg_lvs1a_1p8: lvs1 {
> +		};
> +
> +		vreg_lvs2a_1p8: lvs2 {
> +		};
> +	};
> +};
> +
> +&apps_smmu {
> +	/* TODO: Figure out how to survive booting with this enabled */
> +	status = "disabled";
> +};
> +
> +&gcc {
> +	protected-clocks = <GCC_QSPI_CORE_CLK>,
> +			   <GCC_QSPI_CORE_CLK_SRC>,
> +			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	battery@70 {
> +		compatible = "some,battery";
> +		reg = <0x70>;
> +	};
> +};
> +
> +&i2c3 {
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	hid@15 {
> +		compatible = "hid-over-i2c";
> +		reg = <0x15>;
> +		hid-descr-addr = <0x1>;
> +
> +		interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>;
> +	};
> +
> +	hid@2c {
> +		compatible = "hid-over-i2c";
> +		reg = <0x2c>;
> +		hid-descr-addr = <0x20>;
> +
> +		interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&i2c2_hid_active>;
> +	};
> +};
> +
> +&i2c5 {
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	hid@10 {
> +		compatible = "hid-over-i2c";
> +		reg = <0x10>;
> +		hid-descr-addr = <0x1>;
> +
> +		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&i2c6_hid_active>;
> +	};
> +};
> +
> +&i2c11 {
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	hid@5c {
> +		compatible = "hid-over-i2c";
> +		reg = <0x5c>;
> +		hid-descr-addr = <0x1>;
> +
> +		interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&i2c12_hid_active>;
> +	};
> +};
> +
> +&qupv3_id_0 {
> +	status = "okay";
> +};
> +
> +&qupv3_id_1 {
> +	status = "okay";
> +};
> +
> +&tlmm {
> +	gpio-reserved-ranges = <0 4>, <81 4>;
> +
> +	i2c2_hid_active: i2c2-hid-active {
> +		pins = <37>;
> +		function = "gpio";
> +
> +		input-enable;
> +		bias-pull-up;
> +		drive-strength = <2>;
> +	};
> +
> +	i2c6_hid_active: i2c6-hid-active {
> +		pins = <125>;
> +		function = "gpio";
> +
> +		input-enable;
> +		bias-pull-up;
> +		drive-strength = <2>;
> +	};
> +
> +	i2c12_hid_active: i2c12-hid-active {
> +		pins = <92>;
> +		function = "gpio";
> +
> +		input-enable;
> +		bias-pull-up;
> +		drive-strength = <2>;
> +	};
> +};
> +
> +&uart6 {
> +       status = "okay";
> +
> +       bluetooth {
> +	       compatible = "qcom,wcn3990-bt";
> +
> +	       vddio-supply = <&vreg_s4a_1p8>;
> +	       vddxo-supply = <&vreg_l7a_1p8>;
> +	       vddrf-supply = <&vreg_l17a_1p3>;
> +	       vddch0-supply = <&vreg_l25a_3p3>;
> +	       max-speed = <3200000>;
> +       };
> +};
> +
> +&ufs_mem_hc {
> +	status = "okay";
> +
> +	vcc-supply = <&vreg_l20a_2p95>;
> +	vcc-max-microamp = <600000>;
> +};
> +
> +&ufs_mem_phy {
> +	status = "okay";
> +
> +	vdda-phy-supply = <&vdda_ufs1_core>;
> +	vdda-pll-supply = <&vdda_ufs1_1p2>;
> +};
> +
> +&usb_1 {
> +	status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> +	dr_mode = "host";
> +};
> +
> +&usb_1_hsphy {
> +	status = "okay";
> +
> +	vdd-supply = <&vdda_usb1_ss_core>;
> +	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
> +	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
> +
> +	qcom,imp-res-offset-value = <8>;
> +	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
> +	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
> +	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
> +};
> +
> +&usb_1_qmpphy {
> +	status = "okay";
> +
> +	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
> +	vdda-pll-supply = <&vdda_usb1_ss_core>;
> +};
> +
> +&usb_2 {
> +	status = "okay";
> +};
> +
> +&usb_2_dwc3 {
> +	dr_mode = "host";
> +};
> +
> +&usb_2_hsphy {
> +	status = "okay";
> +
> +	vdd-supply = <&vdda_usb2_ss_core>;
> +	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
> +	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
> +
> +	qcom,imp-res-offset-value = <8>;
> +	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
> +};
> +
> +&usb_2_qmpphy {
> +	status = "okay";
> +
> +	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
> +	vdda-pll-supply = <&vdda_usb2_ss_core>;
> +};
> +
> +&qup_i2c12_default {
> +	drive-strength = <2>;
> +	bias-disable;
> +};
> +
> +&qup_uart6_default {
> +       pinmux {
> +               pins = "gpio45", "gpio46", "gpio47", "gpio48";
> +               function = "qup6";
> +       };
> +
> +       cts {
> +	       pins = "gpio45";
> +	       bias-pull-down;
> +       };
> +
> +       rts-tx {
> +	       pins = "gpio46", "gpio47";
> +	       drive-strength = <2>;
> +	       bias-disable;
> +       };
> +
> +       rx {
> +	       pins = "gpio48";
> +	       bias-pull-up;
> +       };
> +};
> -- 
> 2.17.1
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux