Re: [PATCH v2 07/15] dt: thermal: tsens: Document interrupt support in tsens driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 29, 2019 at 10:04 PM Amit Kucheria <amit.kucheria@xxxxxxxxxx> wrote:
>
> On Thu, Aug 29, 2019 at 8:23 PM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
> >
> > Quoting Amit Kucheria (2019-08-29 01:48:27)
> > > On Wed, Aug 28, 2019 at 6:03 AM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
> > > >
> > > > Quoting Amit Kucheria (2019-08-27 05:14:03)
> > > > > Define two new required properties to define interrupts and
> > > > > interrupt-names for tsens.
> > > > >
> > > > > Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> > > > > ---
> > > > >  Documentation/devicetree/bindings/thermal/qcom-tsens.txt | 8 ++++++++
> > > > >  1 file changed, 8 insertions(+)
> > > > >
> > > > > diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> > > > > index 673cc1831ee9d..686bede72f846 100644
> > > > > --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> > > > > +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> > > > > @@ -22,6 +22,8 @@ Required properties:
> > > > >
> > > > >  - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
> > > > >  - #qcom,sensors: Number of sensors in tsens block
> > > > > +- interrupts: Interrupts generated from Always-On subsystem (AOSS)
> > > >
> > > > Is it always one? interrupt-names makes it sound like it.
> > > >
> > > > > +- interrupt-names: Must be one of the following: "uplow", "critical"
> > >
> > > Will fix to "one or more of the following"
> > >
> >
> > Can we get a known quantity of interrupts for a particular compatible
> > string instead? Let's be as specific as possible. The index matters too,
> > so please list them in the order that is desired.
>
> I *think* we can predict what platforms have uplow and critical
> interrupts based on IP version currently[1]. For newer interrupt
> types, we might need more fine-grained platform compatibles.
>
> [1] Caveat: this is based only on the list of platforms I've currently
> looked at, there might be something internally that breaks these
> rules.

What do you think if we changed the wording to something like the following,

- interrupt-names: Must be one of the following depending on IP version:
   For compatibles qcom,msm8916-tsens, qcom,msm8974-tsens,
qcom,qcs404-tsens, qcom,tsens-v1, use
              interrupt-names = "uplow";
   For compatibles qcom,msm8996-tsens, qcom,msm8998-tsens,
qcom,sdm845-tsens, qcom,tsens-v2, use
              interrupt-names = "uplow", "critical";



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux