Re: [PATCH] phy: qcom-qmp: Correct ready status, again

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/08/2019 02:42, Bjorn Andersson wrote:

> Despite extensive testing of 885bd765963b ("phy: qcom-qmp: Correct
> READY_STATUS poll break condition") I failed to conclude that the
> PHYSTATUS bit of the PCS_STATUS register used in PCIe and USB3 falls as
> the PHY gets ready. Similar to the prior bug with UFS the code will
> generally get past the check before the transition and thereby
> "succeed".
> 
> Correct the name of the register used PCIe and USB3 PHYs, replace
> mask_pcs_ready with a constant expression depending on the type of the
> PHY and check for the appropriate ready state.
> 
> Cc: stable@xxxxxxxxxxxxxxx
> Cc: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
> Cc: Evan Green <evgreen@xxxxxxxxxxxx>
> Cc: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
> Reported-by: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
> Fixes: 885bd765963b ("phy: qcom-qmp: Correct READY_STATUS poll break condition")
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp.c | 33 ++++++++++++++---------------
>  1 file changed, 16 insertions(+), 17 deletions(-)

FWIW, for msm8998:

Tested-by: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>

Regards.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux