Quoting Amit Kucheria (2019-07-25 15:18:36) > There are two fields - id and hw_id - to track what sensor an action was > to performed on. This was because the sensors connected to a TSENS IP > might not be contiguous i.e. 1, 2, 4, 5 with 3 being skipped. > > This causes confusion in the code which uses hw_id sometimes and id > other times (tsens_get_temp, tsens_get_trend). > > Switch to only using the hw_id field to track the physical ID of the > sensor. When we iterate through all the sensors connected to an IP > block, we use an index i to loop through the list of sensors, and then > return the actual hw_id that is registered on that index. > > Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx> > --- Nice cleanup! Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
