Hi,
On 7/22/19 12:07 PM, Aniket Masule wrote:
> Introduced clock scaling using bitrate, preavious
> calculations consider only the cycles per mb.
> Also, clock scaling is now triggered before every
> buffer being queued to the device. This helps in
> deciding precise clock cycles required.
>
> Signed-off-by: Aniket Masule <amasule@xxxxxxxxxxxxxx>
> ---
> drivers/media/platform/qcom/venus/helpers.c | 33 +++++++++++++++++++++++++----
> 1 file changed, 29 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/venus/helpers.c b/drivers/media/platform/qcom/venus/helpers.c
> index 2c976e4..edf403d 100644
> --- a/drivers/media/platform/qcom/venus/helpers.c
> +++ b/drivers/media/platform/qcom/venus/helpers.c
> @@ -399,17 +399,26 @@ static int scale_clocks(struct venus_inst *inst)
> return ret;
> }
>
> -static unsigned long calculate_vpp_freq(struct venus_inst *inst)
> +static unsigned long calculate_inst_freq(struct venus_inst *inst,
> + unsigned long filled_len)
> {
> - unsigned long vpp_freq = 0;
> + unsigned long vpp_freq = 0, vsp_freq = 0;
> + u64 fps = inst->fps;
> u32 mbs_per_sec;
>
> mbs_per_sec = load_per_instance(inst);
> vpp_freq = mbs_per_sec * inst->clk_data.codec_freq_data->vpp_freq;
> /* 21 / 20 is overhead factor */
> vpp_freq += vpp_freq / 20;
> + vsp_freq = mbs_per_sec * inst->clk_data.codec_freq_data->vsp_freq;
>
> - return vpp_freq;
> + /* 10 / 7 is overhead factor */
> + if (inst->session_type == VIDC_SESSION_TYPE_ENC)
> + vsp_freq += (inst->controls.enc.bitrate * 10) / 7;
> + else
> + vsp_freq += ((fps * filled_len * 8) * 10) / 7;
load_per_instance() already taken into account fps, thus I think fps
should be excluded from calculation.
> +
> + return max(vpp_freq, vsp_freq);
> }
>
--
regards,
Stan
