Use use device_property_count_uXX() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/pinctrl/qcom/pinctrl-msm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c index 7f35c196bb3e..90bc667139e0 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -617,8 +617,7 @@ static int msm_gpio_init_valid_mask(struct gpio_chip *chip) } /* The number of GPIOs in the ACPI tables */ - len = ret = device_property_read_u16_array(pctrl->dev, "gpios", NULL, - 0); + len = ret = device_property_count_u16(pctrl->dev, "gpios"); if (ret < 0) return 0; @@ -996,7 +995,7 @@ static bool msm_gpio_needs_valid_mask(struct msm_pinctrl *pctrl) if (pctrl->soc->reserved_gpios) return true; - return device_property_read_u16_array(pctrl->dev, "gpios", NULL, 0) > 0; + return device_property_count_u16(pctrl->dev, "gpios") > 0; } static int msm_gpio_init(struct msm_pinctrl *pctrl) -- 2.20.1
