On Tue, 16 Jul 2019 at 16:47, Sudeep Holla <sudeep.holla@xxxxxxx> wrote: > > On Mon, May 13, 2019 at 09:23:00PM +0200, Ulf Hansson wrote: > > To enable the OS to manage last-man standing activities for a CPU, while an > > idle state for a group of CPUs is selected, let's convert the Hikey > > platform into using the hierarchical CPU topology layout. > > > > Cc: Wei Xu <xuwei5@xxxxxxxxxxxxx> > > Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> > > --- > > > > Changes: > > - None. > > > > --- > > arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 87 ++++++++++++++++++++--- > > 1 file changed, 76 insertions(+), 11 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi > > index 108e2a4227f6..36ff460f428f 100644 > > --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi > > +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi > > cpus { > > [...] > > > @@ -70,9 +128,8 @@ > > }; > > > > CLUSTER_SLEEP: cluster-sleep { > > - compatible = "arm,idle-state"; > > - local-timer-stop; > > - arm,psci-suspend-param = <0x1010000>; > > + compatible = "domain-idle-state"; > > + arm,psci-suspend-param = <0x1000000>; > > entry-latency-us = <1000>; > > exit-latency-us = <700>; > > min-residency-us = <2700>; > > Again this must be original format and as per PSCI spec, your patch > changes this cluster sleep state into cluster retention state which I > think is not what you intended. If the hierarchical topology is used, the parameter for cluster states are ORed with the deepest idle state for the CPU. CPU_SLEEP: 0x0010000 CLUSTER_SLEEP: 0x1000000 After the ORed operation CLUSTER_SLEEP: 0x1010000 So, this indeed works as expected. However, are you saying that ORing the state parameters like above has other problems? I am reading your other replies... Kind regards Uffe