Quoting Gokul Sriram Palanisamy (2019-07-11 08:41:08)
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> index 6a61a63..c24e3f6 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> @@ -10,6 +10,22 @@
> model = "Qualcomm Technologies, Inc. IPQ8074";
> compatible = "qcom,ipq8074";
>
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + smem_region:smem@4ab00000 {
Put a space between the colon and the node name. Also, just call it
memory@4ab00000.
smem_region: memory@4ab00000 {
> + no-map;
> + reg = <0x0 0x4ab00000 0x0 0x00100000>;
> + };
> +
> + q6_region: q6@4b000000 {
memory@
> + no-map;
> + reg = <0x0 0x4b000000 0x0 0x05f00000>;
> + };
> + };
> +
> firmware {
> scm {
> compatible = "qcom,scm-ipq8074", "qcom,scm";
> @@ -431,6 +447,115 @@
> "axi_m_sticky";
> status = "disabled";
> };
> + apcs: syscon@b111000 {
Add a newline between nodes please.
> + compatible = "syscon";
> + reg = <0x0B111000 0x1000>;
> + };
> +
> + wcss: smp2p-wcss {
This node should be outside the soc node because it doesn't have a reg
property
> + compatible = "qcom,smp2p";
> + qcom,smem = <435>, <428>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <0 322 1>;
> +
> + qcom,ipc = <&apcs 8 9>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <1>;
> +
> + wcss_smp2p_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + qcom,smp2p-feature-ssr-ack;
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + wcss_smp2p_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + tcsr_q6_block: syscon@1945000 {
Do you really need _block in these aliases?
> + compatible = "syscon";
> + reg = <0x1945000 0xE000>;
> + };
> +
> + tcsr_mutex_block: syscon@193d000 {
> + compatible = "syscon";
> + reg = <0x1905000 0x8000>;
> + };
> +
> + tcsr_mutex: hwlock@193d000 {
> + compatible = "qcom,tcsr-mutex";
> + syscon = <&tcsr_mutex_block 0 0x80>;
> + #hwlock-cells = <1>;
> + };
> +
> + smem: qcom,smem@4AB00000 {
lowercase please. And just 'smem' I guess.
> + compatible = "qcom,smem";
> + memory-region = <&smem_region>;
> + hwlocks = <&tcsr_mutex 0>;
> + };
> +
> + apcs_glb: mailbox@b111000 {
> + compatible = "qcom,ipq8074-apcs-apps-global";
> + reg = <0xb111000 0x1000>;
These addresses should be padded out to 8 digits for the address part
(not the size).
> +
> + #mbox-cells = <1>;
> + };
> +
> + q6v5_wcss: q6v5_wcss@CD00000 {
lowercase.
> + compatible = "qcom,ipq8074-wcss-pil";
> + reg = <0xCD00000 0x4040>,
> + <0x4AB000 0x20>;
