[PATCH v2 1/2] dt-bindings: panel: Add Sharp LD-D5116Z01B

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@xxxxxxxxx>
Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
---
 .../display/panel/sharp,ld-d5116z01b.txt      | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt

diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt
new file mode 100644
index 000000000000..fd9cf39bde77
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt
@@ -0,0 +1,26 @@
+Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
+
+Required properties:
+- compatible: should be "sharp,ld-d5116z01b"
+- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
+
+This binding is compatible with the simple-panel binding.
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [1]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+	panel: panel {
+		compatible = "sharp,ld-d5116z01b";
+		power-supply = <&vlcd_3v3>;
+
+		port {
+			panel_ep: endpoint {
+				remote-endpoint = <&bridge_out_ep>;
+			};
+		};
+	};
-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux