On Tue, Jun 25, 2019 at 4:14 PM Neeraj Upadhyay <neeraju@xxxxxxxxxxxxxx> wrote: > From: Srinivas Ramana <sramana@xxxxxxxxxxxxxx> > > Introduce the irq_enable callback which will be same as irq_unmask > except that it will also clear the status bit before unmask. > > This will help in clearing any erroneous interrupts that would > have got latched when the interrupt is not in use. > > There may be devices like UART which can use the same gpio line > for data rx as well as a wakeup gpio when in suspend. The data that > was flowing on the line may latch the interrupt and when we enable > the interrupt before going to suspend, this would trigger the > unexpected interrupt. This change helps clearing the interrupt > so that these unexpected interrupts gets cleared. > > Signed-off-by: Srinivas Ramana <sramana@xxxxxxxxxxxxxx> > Signed-off-by: Neeraj Upadhyay <neeraju@xxxxxxxxxxxxxx> > --- > > Changes since v2: > - Renamed function to msm_gpio_irq_clear_unmask() Patch applied, unless Bjorn complains! Yours, Linus Walleij
