Quoting Vinod Koul (2019-06-24 23:31:39)
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index 2c6773188761..30210f5c6726 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -32,6 +32,7 @@
> # define PLL_LOCK_DET BIT(31)
>
> #define PLL_L_VAL(p) ((p)->offset + (p)->regs[PLL_OFF_L_VAL])
> +#define PLL_CAL_L_VAL(p) ((p)->offset + (p)->regs[PLL_OFF_CAL_L_VAL])
> #define PLL_ALPHA_VAL(p) ((p)->offset + (p)->regs[PLL_OFF_ALPHA_VAL])
> #define PLL_ALPHA_VAL_U(p) ((p)->offset + (p)->regs[PLL_OFF_ALPHA_VAL_U])
>
> @@ -44,14 +45,17 @@
> # define PLL_VCO_MASK 0x3
>
> #define PLL_USER_CTL_U(p) ((p)->offset + (p)->regs[PLL_OFF_USER_CTL_U])
> +#define PLL_USER_CTL_U1(p) ((p)->offset + (p)->regs[PLL_OFF_USER_CTL_U1])
>
> #define PLL_CONFIG_CTL(p) ((p)->offset + (p)->regs[PLL_OFF_CONFIG_CTL])
> #define PLL_CONFIG_CTL_U(p) ((p)->offset + (p)->regs[PLL_OFF_CONFIG_CTL_U])
> +#define PLL_CONFIG_CTL_U1(p) ((p)->offset + (p)->regs[PLL_OFF_CONFIG_CTL_U11])
This looks like a typo, U11 vs U1. So I don't think this has been
compile tested....
> #define PLL_TEST_CTL(p) ((p)->offset + (p)->regs[PLL_OFF_TEST_CTL])
> #define PLL_TEST_CTL_U(p) ((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U])
> #define PLL_STATUS(p) ((p)->offset + (p)->regs[PLL_OFF_STATUS])
> #define PLL_OPMODE(p) ((p)->offset + (p)->regs[PLL_OFF_OPMODE])
> #define PLL_FRAC(p) ((p)->offset + (p)->regs[PLL_OFF_FRAC])
> +#define PLL_CAL_VAL(p) ((p)->offset + (p)->regs[PLL_OFF_CAL_VAL])
>
> const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
> [CLK_ALPHA_PLL_TYPE_DEFAULT] = {
> const struct clk_ops clk_alpha_pll_ops = {
> .enable = clk_alpha_pll_enable,
> .disable = clk_alpha_pll_disable,
> @@ -1053,6 +1210,77 @@ static unsigned long clk_alpha_pll_postdiv_fabia_recalc_rate(struct clk_hw *hw,
[...]
> +
> +static int
> +clk_trion_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
> + struct regmap *regmap = pll->clkr.regmap;
> + int i, val = 0, div, ret;
> +
> + /*
> + * If the PLL is in FSM mode, then treat the set_rate callback
> + * as a no-operation.
And this is OK? Shouldn't we fail because we can't change to the rate
that's desired?
> + */
> + ret = regmap_read(regmap, PLL_MODE(pll), &val);
> + if (ret)
> + return ret;
> +
> + if (val & PLL_VOTE_FSM_ENA)
> + return 0;
> +
> + div = DIV_ROUND_UP_ULL(parent_rate, rate);
> + for (i = 0; i < pll->num_post_div; i++) {
> + if (pll->post_div_table[i].div == div) {
> + val = pll->post_div_table[i].val;
> + break;
> + }
> + }
> +
> + return regmap_update_bits(regmap, PLL_USER_CTL(pll),
> + PLL_POST_DIV_MASK(pll) << PLL_POST_DIV_SHIFT,
> + val << PLL_POST_DIV_SHIFT);
> +}
