[PATCHv5 1/2] dt-bindings: coresight: Change CPU phandle to required property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Do not assume the affinity to CPU0 if cpu phandle is omitted.
Update the DT binding rules to reflect the same by changing it
to a required property.

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
---
 .../devicetree/bindings/arm/coresight-cpu-debug.txt       | 4 ++--
 Documentation/devicetree/bindings/arm/coresight.txt       | 8 +++++---
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
index 298291211ea4..f1de3247c1b7 100644
--- a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
+++ b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
@@ -26,8 +26,8 @@ Required properties:
 		processor core is clocked by the internal CPU clock, so it
 		is enabled with CPU clock by default.
 
-- cpu : the CPU phandle the debug module is affined to. When omitted
-	the module is considered to belong to CPU0.
+- cpu : the CPU phandle the debug module is affined to. Do not assume it
+        to default to CPU0 if omitted.
 
 Optional properties:
 
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index 8a88ddebc1a2..fcc3bacfd8bc 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -59,6 +59,11 @@ its hardware characteristcs.
 
 	* port or ports: see "Graph bindings for Coresight" below.
 
+* Additional required property for Embedded Trace Macrocell (version 3.x and
+  version 4.x):
+	* cpu: the cpu phandle this ETM/PTM is affined to. Do not
+	  assume it to default to CPU0 if omitted.
+
 * Additional required properties for System Trace Macrocells (STM):
 	* reg: along with the physical base address and length of the register
 	  set as described above, another entry is required to describe the
@@ -87,9 +92,6 @@ its hardware characteristcs.
 	* arm,cp14: must be present if the system accesses ETM/PTM management
 	  registers via co-processor 14.
 
-	* cpu: the cpu phandle this ETM/PTM is affined to. When omitted the
-	  source is considered to belong to CPU0.
-
 * Optional property for TMC:
 
 	* arm,buffer-size: size of contiguous buffer space for TMC ETR
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux