The patch regulator: qcom_spmi: Add support for PM8005 has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 42ba89c8bbd95fce16122d357456ce1bd35d31d2 Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo <jeffrey.l.hugo@xxxxxxxxx> Date: Mon, 17 Jun 2019 11:37:29 -0700 Subject: [PATCH] regulator: qcom_spmi: Add support for PM8005 The PM8005 is used on the msm8998 MTP. The S1 regulator is VDD_GFX, ie it needs to be on and controlled inorder to use the GPU. Add support to drive the PM8005 regulators so that we can bring up the GPU on msm8998. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@xxxxxxxxx> Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/regulator/qcom_spmi-regulator.c | 176 ++++++++++++++++++++++++ 1 file changed, 176 insertions(+) diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c index 00773a485fc1..ee38b1b63a3b 100644 --- a/drivers/regulator/qcom_spmi-regulator.c +++ b/drivers/regulator/qcom_spmi-regulator.c @@ -96,6 +96,7 @@ enum spmi_regulator_logical_type { SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS, SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS, SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO, + SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426, }; enum spmi_regulator_type { @@ -142,6 +143,7 @@ enum spmi_regulator_subtype { SPMI_REGULATOR_SUBTYPE_5V_BOOST = 0x01, SPMI_REGULATOR_SUBTYPE_FTS_CTL = 0x08, SPMI_REGULATOR_SUBTYPE_FTS2p5_CTL = 0x09, + SPMI_REGULATOR_SUBTYPE_FTS426_CTL = 0x0a, SPMI_REGULATOR_SUBTYPE_BB_2A = 0x01, SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL1 = 0x0d, SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL2 = 0x0e, @@ -162,6 +164,18 @@ enum spmi_common_regulator_registers { SPMI_COMMON_REG_STEP_CTRL = 0x61, }; +/* + * Second common register layout used by newer devices starting with ftsmps426 + * Note that some of the registers from the first common layout remain + * unchanged and their definition is not duplicated. + */ +enum spmi_ftsmps426_regulator_registers { + SPMI_FTSMPS426_REG_VOLTAGE_LSB = 0x40, + SPMI_FTSMPS426_REG_VOLTAGE_MSB = 0x41, + SPMI_FTSMPS426_REG_VOLTAGE_ULS_LSB = 0x68, + SPMI_FTSMPS426_REG_VOLTAGE_ULS_MSB = 0x69, +}; + enum spmi_vs_registers { SPMI_VS_REG_OCP = 0x4a, SPMI_VS_REG_SOFT_START = 0x4c, @@ -221,6 +235,14 @@ enum spmi_common_control_register_index { #define SPMI_COMMON_MODE_FOLLOW_HW_EN0_MASK 0x01 #define SPMI_COMMON_MODE_FOLLOW_ALL_MASK 0x1f +#define SPMI_FTSMPS426_MODE_BYPASS_MASK 3 +#define SPMI_FTSMPS426_MODE_RETENTION_MASK 4 +#define SPMI_FTSMPS426_MODE_LPM_MASK 5 +#define SPMI_FTSMPS426_MODE_AUTO_MASK 6 +#define SPMI_FTSMPS426_MODE_HPM_MASK 7 + +#define SPMI_FTSMPS426_MODE_MASK 0x07 + /* Common regulator pull down control register layout */ #define SPMI_COMMON_PULL_DOWN_ENABLE_MASK 0x80 @@ -266,6 +288,23 @@ enum spmi_common_control_register_index { #define SPMI_FTSMPS_STEP_MARGIN_NUM 4 #define SPMI_FTSMPS_STEP_MARGIN_DEN 5 +#define SPMI_FTSMPS426_STEP_CTRL_DELAY_MASK 0x03 +#define SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT 0 + +/* Clock rate in kHz of the FTSMPS426 regulator reference clock. */ +#define SPMI_FTSMPS426_CLOCK_RATE 4800 + +/* Minimum voltage stepper delay for each step. */ +#define SPMI_FTSMPS426_STEP_DELAY 2 + +/* + * The ratio SPMI_FTSMPS426_STEP_MARGIN_NUM/SPMI_FTSMPS426_STEP_MARGIN_DEN is + * used to adjust the step rate in order to account for oscillator variance. + */ +#define SPMI_FTSMPS426_STEP_MARGIN_NUM 10 +#define SPMI_FTSMPS426_STEP_MARGIN_DEN 11 + + /* VSET value to decide the range of ULT SMPS */ #define ULT_SMPS_RANGE_SPLIT 0x60 @@ -439,6 +478,10 @@ static struct spmi_voltage_range ftsmps2p5_ranges[] = { SPMI_VOLTAGE_RANGE(1, 160000, 1360000, 2200000, 2200000, 10000), }; +static struct spmi_voltage_range ftsmps426_ranges[] = { + SPMI_VOLTAGE_RANGE(0, 0, 320000, 1352000, 1352000, 4000), +}; + static struct spmi_voltage_range boost_ranges[] = { SPMI_VOLTAGE_RANGE(0, 4000000, 4000000, 5550000, 5550000, 50000), }; @@ -472,6 +515,7 @@ static DEFINE_SPMI_SET_POINTS(ln_ldo); static DEFINE_SPMI_SET_POINTS(smps); static DEFINE_SPMI_SET_POINTS(ftsmps); static DEFINE_SPMI_SET_POINTS(ftsmps2p5); +static DEFINE_SPMI_SET_POINTS(ftsmps426); static DEFINE_SPMI_SET_POINTS(boost); static DEFINE_SPMI_SET_POINTS(boost_byp); static DEFINE_SPMI_SET_POINTS(ult_lo_smps); @@ -739,6 +783,23 @@ spmi_regulator_common_set_voltage(struct regulator_dev *rdev, unsigned selector) return spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, buf, 2); } +static int spmi_regulator_common_list_voltage(struct regulator_dev *rdev, + unsigned selector); + +static int spmi_regulator_ftsmps426_set_voltage(struct regulator_dev *rdev, + unsigned selector) +{ + struct spmi_regulator *vreg = rdev_get_drvdata(rdev); + u8 buf[2]; + int mV; + + mV = spmi_regulator_common_list_voltage(rdev, selector) / 1000; + + buf[0] = mV & 0xff; + buf[1] = mV >> 8; + return spmi_vreg_write(vreg, SPMI_FTSMPS426_REG_VOLTAGE_LSB, buf, 2); +} + static int spmi_regulator_set_voltage_time_sel(struct regulator_dev *rdev, unsigned int old_selector, unsigned int new_selector) { @@ -770,6 +831,21 @@ static int spmi_regulator_common_get_voltage(struct regulator_dev *rdev) return spmi_hw_selector_to_sw(vreg, voltage_sel, range); } +static int spmi_regulator_ftsmps426_get_voltage(struct regulator_dev *rdev) +{ + struct spmi_regulator *vreg = rdev_get_drvdata(rdev); + const struct spmi_voltage_range *range; + u8 buf[2]; + int uV; + + spmi_vreg_read(vreg, SPMI_FTSMPS426_REG_VOLTAGE_LSB, buf, 2); + + uV = (((unsigned int)buf[1] << 8) | (unsigned int)buf[0]) * 1000; + range = vreg->set_points->range; + + return (uV - range->set_point_min_uV) / range->step_uV; +} + static int spmi_regulator_single_map_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { @@ -915,6 +991,23 @@ static unsigned int spmi_regulator_common_get_mode(struct regulator_dev *rdev) } } +static unsigned int spmi_regulator_ftsmps426_get_mode(struct regulator_dev *rdev) +{ + struct spmi_regulator *vreg = rdev_get_drvdata(rdev); + u8 reg; + + spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, ®, 1); + + switch (reg) { + case SPMI_FTSMPS426_MODE_HPM_MASK: + return REGULATOR_MODE_NORMAL; + case SPMI_FTSMPS426_MODE_AUTO_MASK: + return REGULATOR_MODE_FAST; + default: + return REGULATOR_MODE_IDLE; + } +} + static int spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode) { @@ -937,6 +1030,30 @@ spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode) return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask); } +static int +spmi_regulator_ftsmps426_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct spmi_regulator *vreg = rdev_get_drvdata(rdev); + u8 mask = SPMI_FTSMPS426_MODE_MASK; + u8 val; + + switch (mode) { + case REGULATOR_MODE_NORMAL: + val = SPMI_FTSMPS426_MODE_HPM_MASK; + break; + case REGULATOR_MODE_FAST: + val = SPMI_FTSMPS426_MODE_AUTO_MASK; + break; + case REGULATOR_MODE_IDLE: + val = SPMI_FTSMPS426_MODE_LPM_MASK; + break; + default: + return -EINVAL; + } + + return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask); +} + static int spmi_regulator_common_set_load(struct regulator_dev *rdev, int load_uA) { @@ -1266,6 +1383,21 @@ static struct regulator_ops spmi_ult_ldo_ops = { .set_soft_start = spmi_regulator_common_set_soft_start, }; +static struct regulator_ops spmi_ftsmps426_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = spmi_regulator_ftsmps426_set_voltage, + .set_voltage_time_sel = spmi_regulator_set_voltage_time_sel, + .get_voltage_sel = spmi_regulator_ftsmps426_get_voltage, + .map_voltage = spmi_regulator_single_map_voltage, + .list_voltage = spmi_regulator_common_list_voltage, + .set_mode = spmi_regulator_ftsmps426_set_mode, + .get_mode = spmi_regulator_ftsmps426_get_mode, + .set_load = spmi_regulator_common_set_load, + .set_pull_down = spmi_regulator_common_set_pull_down, +}; + /* Maximum possible digital major revision value */ #define INF 0xFF @@ -1301,6 +1433,7 @@ static const struct spmi_regulator_mapping supported_regulators[] = { SPMI_VREG(BOOST, 5V_BOOST, 0, INF, BOOST, boost, boost, 0), SPMI_VREG(FTS, FTS_CTL, 0, INF, FTSMPS, ftsmps, ftsmps, 100000), SPMI_VREG(FTS, FTS2p5_CTL, 0, INF, FTSMPS, ftsmps, ftsmps2p5, 100000), + SPMI_VREG(FTS, FTS426_CTL, 0, INF, FTSMPS426, ftsmps426, ftsmps426, 100000), SPMI_VREG(BOOST_BYP, BB_2A, 0, INF, BOOST_BYP, boost, boost_byp, 0), SPMI_VREG(ULT_BUCK, ULT_HF_CTL1, 0, INF, ULT_LO_SMPS, ult_lo_smps, ult_lo_smps, 100000), @@ -1438,6 +1571,34 @@ static int spmi_regulator_init_slew_rate(struct spmi_regulator *vreg) return ret; } +static int spmi_regulator_init_slew_rate_ftsmps426(struct spmi_regulator *vreg) +{ + int ret; + u8 reg = 0; + int delay, slew_rate; + const struct spmi_voltage_range *range = &vreg->set_points->range[0]; + + ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_STEP_CTRL, ®, 1); + if (ret) { + dev_err(vreg->dev, "spmi read failed, ret=%d\n", ret); + return ret; + } + + delay = reg & SPMI_FTSMPS426_STEP_CTRL_DELAY_MASK; + delay >>= SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT; + + /* slew_rate has units of uV/us */ + slew_rate = SPMI_FTSMPS426_CLOCK_RATE * range->step_uV; + slew_rate /= 1000 * (SPMI_FTSMPS426_STEP_DELAY << delay); + slew_rate *= SPMI_FTSMPS426_STEP_MARGIN_NUM; + slew_rate /= SPMI_FTSMPS426_STEP_MARGIN_DEN; + + /* Ensure that the slew rate is greater than 0 */ + vreg->slew_rate = max(slew_rate, 1); + + return ret; +} + static int spmi_regulator_init_registers(struct spmi_regulator *vreg, const struct spmi_regulator_init_data *data) { @@ -1577,6 +1738,12 @@ static int spmi_regulator_of_parse(struct device_node *node, ret = spmi_regulator_init_slew_rate(vreg); if (ret) return ret; + break; + case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426: + ret = spmi_regulator_init_slew_rate_ftsmps426(vreg); + if (ret) + return ret; + break; default: break; } @@ -1733,7 +1900,16 @@ static const struct spmi_regulator_data pmi8994_regulators[] = { { } }; +static const struct spmi_regulator_data pm8005_regulators[] = { + { "s1", 0x1400, "vdd_s1", }, + { "s2", 0x1700, "vdd_s2", }, + { "s3", 0x1a00, "vdd_s3", }, + { "s4", 0x1d00, "vdd_s4", }, + { } +}; + static const struct of_device_id qcom_spmi_regulator_match[] = { + { .compatible = "qcom,pm8005-regulators", .data = &pm8005_regulators }, { .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators }, { .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators }, { .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators }, -- 2.20.1
