On Sun 02 Jun 18:04 PDT 2019, Brian Masney wrote: > From: Jonathan Marek <jonathan@xxxxxxxx> > > Add support for the Synaptics RMI4 touchscreen that is found on the > Nexus 5. > > Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx> > Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> Applied for 5.3 PS. Please use a --cover-letter when sending multiple patches. Thanks, Bjorn > --- > This is to be applied on top of the display patch series: > https://lore.kernel.org/lkml/20190531094619.31704-1-masneyb@xxxxxxxxxxxxx/ > > .../qcom-msm8974-lge-nexus5-hammerhead.dts | 64 +++++++++++++++++++ > 1 file changed, 64 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > index c92ea01e3918..06c33bd71620 100644 > --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > @@ -280,6 +280,16 @@ > }; > }; > > + i2c2_pins: i2c2 { > + mux { > + pins = "gpio6", "gpio7"; > + function = "blsp_i2c2"; > + > + drive-strength = <2>; > + bias-disable; > + }; > + }; > + > i2c3_pins: i2c3 { > mux { > pins = "gpio10", "gpio11"; > @@ -326,6 +336,25 @@ > bias-disable; > }; > }; > + > + touch_pin: touch { > + int { > + pins = "gpio5"; > + function = "gpio"; > + > + drive-strength = <2>; > + bias-disable; > + input-enable; > + }; > + > + reset { > + pins = "gpio8"; > + function = "gpio"; > + > + drive-strength = <2>; > + bias-pull-up; > + }; > + }; > }; > > sdhci@f9824900 { > @@ -468,6 +497,41 @@ > }; > }; > > + i2c@f9924000 { > + status = "ok"; > + > + clock-frequency = <355000>; > + qcom,src-freq = <50000000>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c2_pins>; > + > + synaptics@70 { > + compatible = "syna,rmi4-i2c"; > + reg = <0x70>; > + > + interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>; > + vdd-supply = <&pm8941_l22>; > + vio-supply = <&pm8941_lvs3>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&touch_pin>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + rmi4-f01@1 { > + reg = <0x1>; > + syna,nosleep-mode = <1>; > + }; > + > + rmi4-f12@12 { > + reg = <0x12>; > + syna,sensor-type = <1>; > + }; > + }; > + }; > + > i2c@f9925000 { > status = "ok"; > pinctrl-names = "default"; > -- > 2.20.1 >
