Re: [PATCH v4 7/7] regulator: qcom_spmi: add PMS405 SPMI regulator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu 13 Jun 14:27 PDT 2019, Jeffrey Hugo wrote:

> From: Jorge Ramirez <jorge.ramirez-ortiz@xxxxxxxxxx>
> 
> The PMS405 has 5 HFSMPS and 13 LDO regulators,
> 
> This commit adds support for one of the 5 HFSMPS regulators (s3) to
> the spmi regulator driver.
> 
> The PMIC HFSMPS 430 regulators have 8 mV step size and a voltage
> control scheme consisting of two  8-bit registers defining a 16-bit
> voltage set point in units of millivolts
> 
> S3 controls the cpu voltages (s3 is a buck regulator of type HFS430);
> it is therefore required so we can enable voltage scaling for safely
> running cpufreq.
> 
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>
> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@xxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

> ---
>  drivers/regulator/qcom_spmi-regulator.c | 43 +++++++++++++++++++++++--
>  1 file changed, 40 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
> index c8791b036c53..debe4dc74d27 100644
> --- a/drivers/regulator/qcom_spmi-regulator.c
> +++ b/drivers/regulator/qcom_spmi-regulator.c
> @@ -105,6 +105,7 @@ enum spmi_regulator_logical_type {
>  	SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS,
>  	SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO,
>  	SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426,
> +	SPMI_REGULATOR_LOGICAL_TYPE_HFS430,
>  };
>  
>  enum spmi_regulator_type {
> @@ -157,6 +158,7 @@ enum spmi_regulator_subtype {
>  	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL2	= 0x0e,
>  	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3	= 0x0f,
>  	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4	= 0x10,
> +	SPMI_REGULATOR_SUBTYPE_HFS430		= 0x0a,
>  };
>  
>  enum spmi_common_regulator_registers {
> @@ -302,6 +304,8 @@ enum spmi_common_control_register_index {
>  /* Clock rate in kHz of the FTSMPS426 regulator reference clock. */
>  #define SPMI_FTSMPS426_CLOCK_RATE		4800
>  
> +#define SPMI_HFS430_CLOCK_RATE			1600
> +
>  /* Minimum voltage stepper delay for each step. */
>  #define SPMI_FTSMPS426_STEP_DELAY		2
>  
> @@ -515,6 +519,10 @@ static struct spmi_voltage_range ult_pldo_ranges[] = {
>  	SPMI_VOLTAGE_RANGE(0, 1750000, 1750000, 3337500, 3337500, 12500),
>  };
>  
> +static struct spmi_voltage_range hfs430_ranges[] = {
> +	SPMI_VOLTAGE_RANGE(0, 320000, 320000, 2040000, 2040000, 8000),
> +};
> +
>  static DEFINE_SPMI_SET_POINTS(pldo);
>  static DEFINE_SPMI_SET_POINTS(nldo1);
>  static DEFINE_SPMI_SET_POINTS(nldo2);
> @@ -530,6 +538,7 @@ static DEFINE_SPMI_SET_POINTS(ult_lo_smps);
>  static DEFINE_SPMI_SET_POINTS(ult_ho_smps);
>  static DEFINE_SPMI_SET_POINTS(ult_nldo);
>  static DEFINE_SPMI_SET_POINTS(ult_pldo);
> +static DEFINE_SPMI_SET_POINTS(hfs430);
>  
>  static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
>  				 int len)
> @@ -1399,12 +1408,26 @@ static struct regulator_ops spmi_ftsmps426_ops = {
>  	.set_pull_down		= spmi_regulator_common_set_pull_down,
>  };
>  
> +static struct regulator_ops spmi_hfs430_ops = {
> +	.enable			= regulator_enable_regmap,
> +	.disable		= regulator_disable_regmap,
> +	.is_enabled		= regulator_is_enabled_regmap,
> +	.set_voltage_sel	= spmi_regulator_ftsmps426_set_voltage,
> +	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
> +	.get_voltage		= spmi_regulator_ftsmps426_get_voltage,
> +	.map_voltage		= spmi_regulator_single_map_voltage,
> +	.list_voltage		= spmi_regulator_common_list_voltage,
> +	.set_mode		= spmi_regulator_ftsmps426_set_mode,
> +	.get_mode		= spmi_regulator_ftsmps426_get_mode,
> +};
> +
>  /* Maximum possible digital major revision value */
>  #define INF 0xFF
>  
>  static const struct spmi_regulator_mapping supported_regulators[] = {
>  	/*           type subtype dig_min dig_max ltype ops setpoints hpm_min */
>  	SPMI_VREG(BUCK,  GP_CTL,   0, INF, SMPS,   smps,   smps,   100000),
> +	SPMI_VREG(BUCK,  HFS430,   0, INF, HFS430, hfs430, hfs430,  10000),
>  	SPMI_VREG(LDO,   N300,     0, INF, LDO,    ldo,    nldo1,   10000),
>  	SPMI_VREG(LDO,   N600,     0,   0, LDO,    ldo,    nldo2,   10000),
>  	SPMI_VREG(LDO,   N1200,    0,   0, LDO,    ldo,    nldo2,   10000),
> @@ -1572,7 +1595,8 @@ static int spmi_regulator_init_slew_rate(struct spmi_regulator *vreg)
>  	return ret;
>  }
>  
> -static int spmi_regulator_init_slew_rate_ftsmps426(struct spmi_regulator *vreg)
> +static int spmi_regulator_init_slew_rate_ftsmps426(struct spmi_regulator *vreg,
> +						   int clock_rate)
>  {
>  	int ret;
>  	u8 reg = 0;
> @@ -1589,7 +1613,7 @@ static int spmi_regulator_init_slew_rate_ftsmps426(struct spmi_regulator *vreg)
>  	delay >>= SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT;
>  
>  	/* slew_rate has units of uV/us */
> -	slew_rate = SPMI_FTSMPS426_CLOCK_RATE * range->step_uV;
> +	slew_rate = clock_rate * range->step_uV;
>  	slew_rate /= 1000 * (SPMI_FTSMPS426_STEP_DELAY << delay);
>  	slew_rate *= SPMI_FTSMPS426_STEP_MARGIN_NUM;
>  	slew_rate /= SPMI_FTSMPS426_STEP_MARGIN_DEN;
> @@ -1741,7 +1765,14 @@ static int spmi_regulator_of_parse(struct device_node *node,
>  			return ret;
>  		break;
>  	case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426:
> -		ret = spmi_regulator_init_slew_rate_ftsmps426(vreg);
> +		ret = spmi_regulator_init_slew_rate_ftsmps426(vreg,
> +						SPMI_FTSMPS426_CLOCK_RATE);
> +		if (ret)
> +			return ret;
> +		break;
> +	case SPMI_REGULATOR_LOGICAL_TYPE_HFS430:
> +		ret = spmi_regulator_init_slew_rate_ftsmps426(vreg,
> +							SPMI_HFS430_CLOCK_RATE);
>  		if (ret)
>  			return ret;
>  		break;
> @@ -1909,6 +1940,11 @@ static const struct spmi_regulator_data pm8005_regulators[] = {
>  	{ }
>  };
>  
> +static const struct spmi_regulator_data pms405_regulators[] = {
> +	{ "s3", 0x1a00, "vdd_s3"},
> +	{ }
> +};
> +
>  static const struct of_device_id qcom_spmi_regulator_match[] = {
>  	{ .compatible = "qcom,pm8005-regulators", .data = &pm8005_regulators },
>  	{ .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators },
> @@ -1916,6 +1952,7 @@ static const struct of_device_id qcom_spmi_regulator_match[] = {
>  	{ .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators },
>  	{ .compatible = "qcom,pm8994-regulators", .data = &pm8994_regulators },
>  	{ .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators },
> +	{ .compatible = "qcom,pms405-regulators", .data = &pms405_regulators },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match);
> -- 
> 2.17.1
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux