[PATCH v5 3/6] clk: qcom: smd: Add XO clock for MSM8998

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The XO clock generally feeds into other clock controllers as the parent
for a lot of clock generators.

Drop the "fake" XO clock in GCC now that it is redundant can will cause a
namespace conflict.  Also enumerate the RPMCC dependency of GCC in Kconfig.

Signed-off-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
---
 drivers/clk/qcom/Kconfig       |  1 +
 drivers/clk/qcom/clk-smd-rpm.c | 24 ++++++++++++++++++++----
 drivers/clk/qcom/gcc-msm8998.c | 29 ++++++++++++-----------------
 3 files changed, 33 insertions(+), 21 deletions(-)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 18bdf34..6c319ca 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -216,6 +216,7 @@ config MSM_MMCC_8996
 config MSM_GCC_8998
 	tristate "MSM8998 Global Clock Controller"
 	select QCOM_GDSC
+	select QCOM_CLK_SMD_RPM
 	help
 	  Support for the global clock controller on msm8998 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index 22dd42a..55a622df 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -68,7 +68,7 @@
 	}
 
 #define __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id,    \
-				    stat_id, r, key)			      \
+				    stat_id, r, key, ignore_unused)			      \
 	static struct clk_smd_rpm _platform##_##_active;		      \
 	static struct clk_smd_rpm _platform##_##_name = {		      \
 		.rpm_res_type = (type),					      \
@@ -83,6 +83,7 @@
 			.name = #_name,					      \
 			.parent_names = (const char *[]){ "xo_board" },	      \
 			.num_parents = 1,				      \
+			.flags = (ignore_unused) ? CLK_IGNORE_UNUSED : 0,     \
 		},							      \
 	};								      \
 	static struct clk_smd_rpm _platform##_##_active = {		      \
@@ -99,6 +100,7 @@
 			.name = #_active,				      \
 			.parent_names = (const char *[]){ "xo_board" },	      \
 			.num_parents = 1,				      \
+			.flags = (ignore_unused) ? CLK_IGNORE_UNUSED : 0,     \
 		},							      \
 	}
 
@@ -108,7 +110,17 @@
 
 #define DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, r)   \
 		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type,  \
-		r_id, 0, r, QCOM_RPM_SMD_KEY_ENABLE)
+		r_id, 0, r, QCOM_RPM_SMD_KEY_ENABLE, false)
+
+/*
+ * Intended for XO clock where we don't want it turned off during late init
+ * if we don't have a consumer by then, but can turn it off later for deep
+ * sleep
+ */
+#define DEFINE_CLK_SMD_RPM_BRANCH_SKIP_UNUSED(_platform, _name, _active, type,\
+					      r_id, r)			      \
+		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type,  \
+		r_id, 0, r, QCOM_RPM_SMD_KEY_ENABLE, true)
 
 #define DEFINE_CLK_SMD_RPM_QDSS(_platform, _name, _active, type, r_id)	      \
 		__DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id,   \
@@ -117,12 +129,12 @@
 #define DEFINE_CLK_SMD_RPM_XO_BUFFER(_platform, _name, _active, r_id)	      \
 		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active,	      \
 		QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000,			      \
-		QCOM_RPM_KEY_SOFTWARE_ENABLE)
+		QCOM_RPM_KEY_SOFTWARE_ENABLE, false)
 
 #define DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(_platform, _name, _active, r_id) \
 		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active,	      \
 		QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000,			      \
-		QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY)
+		QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY, false)
 
 #define to_clk_smd_rpm(_hw) container_of(_hw, struct clk_smd_rpm, hw)
 
@@ -656,6 +668,8 @@ static int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm)
 };
 
 /* msm8998 */
+DEFINE_CLK_SMD_RPM_BRANCH_SKIP_UNUSED(msm8998, xo, xo_a, QCOM_SMD_RPM_MISC_CLK,
+				      0, 19200000);
 DEFINE_CLK_SMD_RPM(msm8998, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
 DEFINE_CLK_SMD_RPM(msm8998, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2);
 DEFINE_CLK_SMD_RPM(msm8998, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0);
@@ -678,6 +692,8 @@ static int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm)
 DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk3, rf_clk3_a, 6);
 DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk3_pin, rf_clk3_a_pin, 6);
 static struct clk_smd_rpm *msm8998_clks[] = {
+	[RPM_SMD_XO_CLK_SRC] = &msm8998_xo,
+	[RPM_SMD_XO_A_CLK_SRC] = &msm8998_xo_a,
 	[RPM_SMD_SNOC_CLK] = &msm8998_snoc_clk,
 	[RPM_SMD_SNOC_A_CLK] = &msm8998_snoc_a_clk,
 	[RPM_SMD_CNOC_CLK] = &msm8998_cnoc_clk,
diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
index 0336882..9c47cbd 100644
--- a/drivers/clk/qcom/gcc-msm8998.c
+++ b/drivers/clk/qcom/gcc-msm8998.c
@@ -11,6 +11,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/clk-provider.h>
+#include <linux/clk.h>
 #include <linux/regmap.h>
 #include <linux/reset-controller.h>
 
@@ -117,17 +118,6 @@ enum {
 	"core_bi_pll_test_se",
 };
 
-static struct clk_fixed_factor xo = {
-	.mult = 1,
-	.div = 1,
-	.hw.init = &(struct clk_init_data){
-		.name = "xo",
-		.parent_names = (const char *[]){ "xo_board" },
-		.num_parents = 1,
-		.ops = &clk_fixed_factor_ops,
-	},
-};
-
 static struct pll_vco fabia_vco[] = {
 	{ 250000000, 2000000000, 0 },
 	{ 125000000, 1000000000, 1 },
@@ -2959,10 +2949,6 @@ enum {
 	.fast_io	= true,
 };
 
-static struct clk_hw *gcc_msm8998_hws[] = {
-	&xo.hw,
-};
-
 static const struct qcom_cc_desc gcc_msm8998_desc = {
 	.config = &gcc_msm8998_regmap_config,
 	.clks = gcc_msm8998_clocks,
@@ -2971,14 +2957,23 @@ enum {
 	.num_resets = ARRAY_SIZE(gcc_msm8998_resets),
 	.gdscs = gcc_msm8998_gdscs,
 	.num_gdscs = ARRAY_SIZE(gcc_msm8998_gdscs),
-	.clk_hws = gcc_msm8998_hws,
-	.num_clk_hws = ARRAY_SIZE(gcc_msm8998_hws),
 };
 
 static int gcc_msm8998_probe(struct platform_device *pdev)
 {
 	struct regmap *regmap;
 	int ret;
+	struct clk *xo;
+
+	/*
+	 * We must have a valid XO to continue, otherwise having a missing
+	 * parent on a system critical clock like the uart core clock can
+	 * result in strange bugs.  We know XO will be provided by rpmcc,
+	 * but it might not be specifid in DT like it should.
+	 */
+	xo = __clk_lookup("xo");
+	if (!xo)
+		return -EPROBE_DEFER;
 
 	regmap = qcom_cc_map(pdev, &gcc_msm8998_desc);
 	if (IS_ERR(regmap))
-- 
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux