[PATCH 0/4] Add labibb regulator support for LCD display mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch series adds the labibb regulator for supporting LCD display mode
on SDM845.

Nisha Kumari (4):
  dt-bindings: regulator: Add labibb regulator
  arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
  regulator: Add labibb driver
  regulator: adding interrupt handling in labibb regulator

 .../bindings/regulator/qcom-labibb-regulator.txt   |  57 ++
 arch/arm64/boot/dts/qcom/pmi8998.dtsi              |  22 +
 drivers/regulator/Kconfig                          |  10 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/qcom-labibb-regulator.c          | 599 +++++++++++++++++++++
 5 files changed, 689 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.txt
 create mode 100644 drivers/regulator/qcom-labibb-regulator.c

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux