The Qualcomm QCS404 platform has several buses that could be controlled
and tuned according to the bandwidth demand.
Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
---
v3:
- Add a reg property and move the interconnect nodes under the "soc" node.
v2:
- No changes.
.../bindings/interconnect/qcom,qcs404.txt | 46 +++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
new file mode 100644
index 000000000000..14a827268dda
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
@@ -0,0 +1,46 @@
+Qualcomm QCS404 Network-On-Chip interconnect driver binding
+-----------------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+ "qcom,qcs404-bimc"
+ "qcom,qcs404-pcnoc"
+ "qcom,qcs404-snoc"
+- #interconnect-cells : should contain 1
+
+Optional properties :
+reg : specifies the physical base address and size of registers
+clocks : list of phandles and specifiers to all interconnect bus clocks
+clock-names : clock names should include both "bus_clk" and "bus_a_clk"
+
+Example:
+
+soc {
+ ...
+ bimc: interconnect@400000 {
+ reg = <0x00400000 0x80000>;
+ compatible = "qcom,qcs404-bimc";
+ #interconnect-cells = <1>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
+ pnoc: interconnect@500000 {
+ reg = <0x00500000 0x15080>;
+ compatible = "qcom,qcs404-pcnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+ <&rpmcc RPM_SMD_PNOC_A_CLK>;
+ };
+
+ snoc: interconnect@580000 {
+ reg = <0x00580000 0x23080>;
+ compatible = "qcom,qcs404-snoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+};
