- DMA/PIO:
If an error IRQ occurred during PIO or DMA mode make sure to log it so
on completion the transfer can be marked as an error.
- PIO:
Do not complete a transaction until all data has been transferred or
an error IRQ was flagged.
1) If there was no error IRQ, ignore the done flag IRQ
(QUP_OP_MAX_INPUT_DONE_FLAG) until all data for the transfer has been
processed: not doing so risks completing the transfer returning
uninitialized data in the buffers.
2) Under stress testing we have identified the need to
protect read/write operations against spurious IN/OUT service events.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>
---
drivers/spi/spi-qup.c | 51 ++++++++++++++++++++++++++++++++++++++-----
1 file changed, 45 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index 974a8ce58b68..0a2ffd2f968a 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -281,6 +281,9 @@ static void spi_qup_read(struct spi_qup *controller, u32 *opflags)
writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
controller->base + QUP_OPERATIONAL);
+ if (!remainder)
+ goto exit;
+
if (is_block_mode) {
num_words = (remainder > words_per_block) ?
words_per_block : remainder;
@@ -310,11 +313,13 @@ static void spi_qup_read(struct spi_qup *controller, u32 *opflags)
* to refresh opflags value because MAX_INPUT_DONE_FLAG may now be
* present and this is used to determine if transaction is complete
*/
- *opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
- if (is_block_mode && *opflags & QUP_OP_MAX_INPUT_DONE_FLAG)
- writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
- controller->base + QUP_OPERATIONAL);
-
+exit:
+ if (!remainder) {
+ *opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
+ if (is_block_mode && *opflags & QUP_OP_MAX_INPUT_DONE_FLAG)
+ writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
+ controller->base + QUP_OPERATIONAL);
+ }
}
static void spi_qup_write_to_fifo(struct spi_qup *controller, u32 num_words)
@@ -362,6 +367,10 @@ static void spi_qup_write(struct spi_qup *controller)
writel_relaxed(QUP_OP_OUT_SERVICE_FLAG,
controller->base + QUP_OPERATIONAL);
+ /* make sure the interrupt is valid */
+ if (!remainder)
+ return;
+
if (is_block_mode) {
num_words = (remainder > words_per_block) ?
words_per_block : remainder;
@@ -575,10 +584,24 @@ static int spi_qup_do_pio(struct spi_device *spi, struct spi_transfer *xfer,
return 0;
}
+static bool spi_qup_data_pending(struct spi_qup *controller)
+{
+ unsigned int remainder_tx, remainder_rx;
+
+ remainder_tx = DIV_ROUND_UP(spi_qup_len(controller) -
+ controller->tx_bytes, controller->w_size);
+
+ remainder_rx = DIV_ROUND_UP(spi_qup_len(controller) -
+ controller->rx_bytes, controller->w_size);
+
+ return remainder_tx || remainder_rx;
+}
+
static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
{
struct spi_qup *controller = dev_id;
u32 opflags, qup_err, spi_err;
+ unsigned long flags;
int error = 0;
qup_err = readl_relaxed(controller->base + QUP_ERROR_FLAGS);
@@ -610,6 +633,11 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
error = -EIO;
}
+ spin_lock_irqsave(&controller->lock, flags);
+ if (!controller->error)
+ controller->error = error;
+ spin_unlock_irqrestore(&controller->lock, flags);
+
if (spi_qup_is_dma_xfer(controller->mode)) {
writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
} else {
@@ -618,11 +646,22 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
if (opflags & QUP_OP_OUT_SERVICE_FLAG)
spi_qup_write(controller);
+
+ if (!spi_qup_data_pending(controller))
+ complete(&controller->done);
}
- if ((opflags & QUP_OP_MAX_INPUT_DONE_FLAG) || error)
+ if (error)
complete(&controller->done);
+ if (opflags & QUP_OP_MAX_INPUT_DONE_FLAG) {
+ if (!spi_qup_is_dma_xfer(controller->mode)) {
+ if (spi_qup_data_pending(controller))
+ return IRQ_HANDLED;
+ }
+ complete(&controller->done);
+ }
+
return IRQ_HANDLED;
}
--
2.21.0
