On Tue, May 14, 2019 at 2:39 AM Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
>
> Bring in the Truly display and enable the DSI channels to make the
> mdss/gpu probe, even though we're lacking LABIB, preventing us from
> seeing anything on the screen.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
Looks good to me and work well too with a wip lab-ibb driver change.
Reviewed-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
Tested-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
> arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 79 +++++++++++++++++++++++++
> 1 file changed, 79 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> index 02b8357c8ce8..83198a19ff57 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> @@ -352,6 +352,77 @@
> status = "okay";
> };
>
> +&dsi0 {
> + status = "okay";
> + vdda-supply = <&vdda_mipi_dsi0_1p2>;
> +
> + qcom,dual-dsi-mode;
> + qcom,master-dsi;
> +
> + ports {
> + port@1 {
> + endpoint {
> + remote-endpoint = <&truly_in_0>;
> + data-lanes = <0 1 2 3>;
> + };
> + };
> + };
> +
> + panel@0 {
> + compatible = "truly,nt35597-2K-display";
> + reg = <0>;
> + vdda-supply = <&vreg_l14a_1p88>;
> +
> + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
> + mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + truly_in_0: endpoint {
> + remote-endpoint = <&dsi0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + truly_in_1: endpoint {
> + remote-endpoint = <&dsi1_out>;
> + };
> + };
> + };
> + };
> +};
> +
> +&dsi0_phy {
> + status = "okay";
> + vdds-supply = <&vdda_mipi_dsi0_pll>;
> +};
> +
> +&dsi1 {
> + status = "okay";
> + vdda-supply = <&vdda_mipi_dsi1_1p2>;
> +
> + qcom,dual-dsi-mode;
> +
> + ports {
> + port@1 {
> + endpoint {
> + remote-endpoint = <&truly_in_1>;
> + data-lanes = <0 1 2 3>;
> + };
> + };
> + };
> +};
> +
> +&dsi1_phy {
> + status = "okay";
> + vdds-supply = <&vdda_mipi_dsi1_pll>;
> +};
> +
> &gcc {
> protected-clocks = <GCC_QSPI_CORE_CLK>,
> <GCC_QSPI_CORE_CLK_SRC>,
> @@ -365,6 +436,14 @@
> clock-frequency = <400000>;
> };
>
> +&mdss {
> + status = "okay";
> +};
> +
> +&mdss_mdp {
> + status = "okay";
> +};
> +
> &qupv3_id_1 {
> status = "okay";
> };
> --
> 2.18.0
>
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
