On 30-04-19, 21:37, Bjorn Andersson wrote: > Add binding for the QMP based side-channel communication mechanism to > the AOSS, which is used to control resources not exposed through the > RPMh interface. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> > --- > > Changes since v6: > - Added #clock-cells > > .../bindings/soc/qcom/qcom,aoss-qmp.txt | 81 +++++++++++++++++++ > include/dt-bindings/power/qcom-aoss-qmp.h | 14 ++++ > 2 files changed, 95 insertions(+) > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt > create mode 100644 include/dt-bindings/power/qcom-aoss-qmp.h > > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt > new file mode 100644 > index 000000000000..14a45b3dc059 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt > @@ -0,0 +1,81 @@ > +Qualcomm Always-On Subsystem side channel binding > + > +This binding describes the hardware component responsible for side channel > +requests to the always-on subsystem (AOSS), used for certain power management > +requests that is not handled by the standard RPMh interface. Each client in the > +SoC has it's own block of message RAM and IRQ for communication with the AOSS. > +The protocol used to communicate in the message RAM is known as Qualcomm > +Messagin Protocol (QMP) s/Messagin/Messaging? Rest lgtm: Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx> -- ~Vinod
