Re: [PATCH] arm64: dts: qcom: qcs404: Add PSCI cpuidle support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 10, 2019 at 2:54 PM Sudeep Holla <sudeep.holla@xxxxxxx> wrote:
>
> On Thu, May 09, 2019 at 11:19:23PM +0530, Amit Kucheria wrote:
> > (Adding Lorenzo and Sudeep)
> >
> > On Wed, May 8, 2019 at 8:26 PM Niklas Cassel <niklas.cassel@xxxxxxxxxx> wrote:
> > >
> > > On Wed, May 08, 2019 at 02:48:19AM +0530, Amit Kucheria wrote:
> > > > On Tue, May 7, 2019 at 1:01 AM Niklas Cassel <niklas.cassel@xxxxxxxxxx> wrote:
> > > > >
> > > > > Add device bindings for CPUs to suspend using PSCI as the enable-method.
> > > > >
> > > > > Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
> > > > > ---
> > > > >  arch/arm64/boot/dts/qcom/qcs404.dtsi | 15 +++++++++++++++
> > > > >  1 file changed, 15 insertions(+)
> > > > >
> > > > > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> > > > > index ffedf9640af7..f9db9f3ee10c 100644
> > > > > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> > > > > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> > > > > @@ -31,6 +31,7 @@
> > > > >                         reg = <0x100>;
> > > > >                         enable-method = "psci";
> > > > >                         next-level-cache = <&L2_0>;
> > > > > +                       cpu-idle-states = <&CPU_PC>;
> > > > >                 };
> > > > >
> > > > >                 CPU1: cpu@101 {
> > > > > @@ -39,6 +40,7 @@
> > > > >                         reg = <0x101>;
> > > > >                         enable-method = "psci";
> > > > >                         next-level-cache = <&L2_0>;
> > > > > +                       cpu-idle-states = <&CPU_PC>;
> > > > >                 };
> > > > >
> > > > >                 CPU2: cpu@102 {
> > > > > @@ -47,6 +49,7 @@
> > > > >                         reg = <0x102>;
> > > > >                         enable-method = "psci";
> > > > >                         next-level-cache = <&L2_0>;
> > > > > +                       cpu-idle-states = <&CPU_PC>;
> > > > >                 };
> > > > >
> > > > >                 CPU3: cpu@103 {
> > > > > @@ -55,12 +58,24 @@
> > > > >                         reg = <0x103>;
> > > > >                         enable-method = "psci";
> > > > >                         next-level-cache = <&L2_0>;
> > > > > +                       cpu-idle-states = <&CPU_PC>;
> > > > >                 };
> > > > >
> > > > >                 L2_0: l2-cache {
> > > > >                         compatible = "cache";
> > > > >                         cache-level = <2>;
> > > > >                 };
> > > > > +
> > > > > +               idle-states {
> > > >
> > > > entry-method="psci" property goes here. I have a patch fixing it for 410c ;-)
> > > >
> > > > I don't think the psci_cpuidle_ops will even get called without this.
> > >
> > > Hello Amit,
> > >
> > > I added debug prints in psci_cpu_suspend_enter() and arm_cpuidle_suspend()
> > > when verifying this patch, and psci_cpu_suspend_enter() is indeed called,
> > > with the correct psci suspend parameter.
> > >
> > > The output from:
> > > grep "" /sys/bus/cpu/devices/cpu0/cpuidle/state?/*
> > > also looks sane.
> > >
> > > However, if 'entry-method="psci"' is required according to the DT binding,
> > > perhaps you can send a 2/2 series that fixes both this patch and msm8916 ?
> >
> > Last time I discussed this with Lorenzo and Sudeep (on IRC), I pointed
> > out that entry-method="psci" isn't checked for in code anywhere. Let's
> > get their view on this for posterity.
> >
>
> Yes entry-method="psci" is required as per DT binding but not checked
> in code on arm64. We have CPU ops with idle enabled only for "psci", so
> there's not need to check.

I don't see it being checked on arm32 either.

> Once we have DT schema validation, this will be caught, so it's better
> to fix it.
>
> > What does entry-method="psci" in the idle-states node achieve that
> > enable-method="psci" in the cpu node doesn't achieve? (Note: enable-
> > vs. entry-).
> >
>
> From DT binding perspective, we can have different CPU enable-method
> and CPU idle entry-method. However on arm64, it's restricted to PSCI
> only. I need to check what happens on arm32 though, as the driver
> invocation happens via CPUIDLE_METHOD_OF_DECLARE.
>
> > The enable-method property is the one that sets up the
> > psci_cpuidle_ops callbacks through the CPUIDLE_METHOD_OF_DECLARE
> > macro.
> >
>
> Indeed.
>
> > IOW, if we deprecated the entry-method property, everything would
> > still work, wouldn't it?
>
> Why do you want to deprecated just because Linux kernel doesn't want to
> use it. That's not a valid reason IMO.

Fair enough. Just want to make sure that it isn't some vestigial
property that was never used. Do you know if another OS is actually
using it?

> > Do we expect to support PSCI platforms that might have a different
> > entry-method for idle states?
>
> Not on ARM64, but same DT bindings can be used for idle-states on
> say RISC-V and have some value other than "psci".

Both enable-method and entry-method properties are currently only used
(and documented) for ARM platforms. Hence this discussion about
deprecation of one of them.

> > Should I whip up a patch removing entry-method? Since we don't check
> > for it today, it won't break the old DTs either.
> >
>
> Nope, I don't think so. But if it's causing issues, we can look into it.
> I don't want to restrict the use of the bindings for ARM/ARM64 or psci only.

Only a couple of minor issues:
1. There is a trickle of DTs that need fixing up every now and then
because they don't use entry-method in their idle-states node. Schema
validation ought to fix that.
2. A property that isn't ready by any code is a bit confusing. Perhaps
we can mention something to the effect in the documentation?

Regards,
Amit



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux