[PATCH] dt-bindings: pinctrl: Fix spelling of bias-pull-up

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The property is spelled 'bias-pull-up', as documented in
pinctrl-bindings.txt.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
---
 .../devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt        | 2 +-
 .../devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt        | 2 +-
 .../devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt        | 2 +-
 .../devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt        | 2 +-
 .../devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt        | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
index c2dbb3e8d840..4e90ddd77784 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -42,7 +42,7 @@ information about e.g. the mux function.
 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:

- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
  output-low, output-high.

 Non-empty subnodes must specify the 'pins' property.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
index 991be0cd0948..84be0f2c6f3b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
@@ -44,7 +44,7 @@ information about e.g. the mux function.

 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength.
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength.

 Non-empty subnodes must specify the 'pins' property.
 Note that not all properties are valid for all pins.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
index 7ed56a1b70fc..a7aaaa7db83b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
@@ -42,7 +42,7 @@ information about e.g. the mux function.
 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:

- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
  output-low, output-high.

 Non-empty subnodes must specify the 'pins' property.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
index cdc4787e59d2..f095209848c8 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
@@ -42,7 +42,7 @@ information about e.g. the mux function.
 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:

- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
  output-low, output-high.

 Non-empty subnodes must specify the 'pins' property.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
index c22e6c425d0b..004056506679 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
@@ -41,7 +41,7 @@ information about e.g. the mux function.

 The following generic properties as defined in pinctrl-bindings.txt are valid
 to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength.
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength.

 Non-empty subnodes must specify the 'pins' property.
 Note that not all properties are valid for all pins.
--
2.20.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux