Re: [PATCH v2 00/13] qcom: dts: thermal cleanups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/04/2019 20:46, Amit Kucheria wrote:

> On Tue, Apr 2, 2019 at 8:58 PM Marc Gonzalez wrote:
>>
>> On 29/03/2019 11:12, Amit Kucheria wrote:
>>
>>> Changes since v1:
>>> - Devices that are not associated with cooling-maps use the 'hot' type
>>> - Remove critical trip from such devices too and restrict that type of CPUs
>>> - For 8916, add the sensor on the modem
>>>
>>> Description:
>>> - Expose all temperature sensors on msm8916, msm996, msm8998, sdm845
>>> - split up the register address map for msm8998
>>> - standardize names of the various thermal-zones across boards to make it
>>>   easy for test scripts to parse
>>
>> This is what I see on msm8998 with your patch series applied on top of
>> yesterday's next:
>>
>> # dmesg | grep of_parse_thermal_zones
>> of_parse_thermal_zones: build cpu0-thermal zone 0
>> of_parse_thermal_zones: build cpu1-thermal zone 0
>> of_parse_thermal_zones: build cpu2-thermal zone 0
>> of_parse_thermal_zones: build cpu3-thermal zone 0
>> of_parse_thermal_zones: build cpu4-thermal zone 0
>> of_parse_thermal_zones: build cpu5-thermal zone 0
>> of_parse_thermal_zones: build cpu6-thermal zone 0
>> of_parse_thermal_zones: build cpu7-thermal zone 0
>> of_parse_thermal_zones: build gpu-thermal-bottom zone 0
>> of_parse_thermal_zones: build gpu-thermal-top zone 0
>> of_parse_thermal_zones: build cluster0-mhm-thermal zone -22
>> of_parse_thermal_zones: build cluster1-mhm-thermal zone -22
>> of_parse_thermal_zones: build cluster1-l2-thermal zone 0
>> of_parse_thermal_zones: build modem-thermal zone 0
>> of_parse_thermal_zones: build mem-thermal zone 0
>> of_parse_thermal_zones: build wlan-thermal zone 0
>> of_parse_thermal_zones: build q6-dsp-thermal zone 0
>> of_parse_thermal_zones: build camera-thermal zone 0
>> of_parse_thermal_zones: build multimedia-thermal zone 0
>> of_parse_thermal_zones: build pm8998 zone 0
>> of_parse_thermal_zones: build battery-thermal zone 0
>> of_parse_thermal_zones: build skin-thermal zone 0
>>
>> NB: -EINVAL for cluster0-mhm-thermal and cluster1-mhm-thermal
>>
>>
>> # cat /sys/devices/virtual/thermal/thermal_zone*/temp
>> 35800
>> 35200
>> 34500
>> 34800
>> 34500
>> 34100
>> 34100
>> 33500
>> 33800
>> cat: /sys/devices/virtual/thermal/thermal_zone17/temp: Invalid argument
>> 36100
>> cat: /sys/devices/virtual/thermal/thermal_zone19/temp: Invalid argument
>> 35500
>> 36100
>> 35800
>> 35200
>> 35500
>> 36100
>> cat: /sys/devices/virtual/thermal/thermal_zone8/temp: Invalid argument
>> cat: /sys/devices/virtual/thermal/thermal_zone9/temp: Invalid argument
>>
>>
>> Are the failures expected?
>> (cluster*-mhm-thermal and thermal_zone*/temp)
> 
> No they are not. Unfortunately, I didn't have HW to test, so
> appreciate the help with testing. I'll check the 8, 9, 17 and 19 again
> before resubmitting.

Looks like Andy merged this series?

https://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git/log/?h=for-next

I was expecting a respin, or a discussion of the failures.

Slightly confused. What next?

Regards.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux