On Mon, Apr 15 2019 at 06:42 -0600, Marc Zyngier wrote:
On 04/04/2019 16:58, Lina Iyer wrote:
On Mon, Mar 18 2019 at 11:54 -0600, Marc Zyngier wrote:
On Wed, 13 Mar 2019 15:18:37 -0600
Lina Iyer <ilina@xxxxxxxxxxxxxx> wrote:
Please do Cc Rob when posting DT related patches.
Some interrupt controllers in a SoC, are always powered on and have a
select interrupts routed to them, so that they can wakeup the SoC from
suspend. Add wakeup-parent DT property to refer to these interrupt
controllers.
If the interrupts routed to the wakeup parent are not sequential, than a
map needs to exist to associate the same interrupt line on multiple
interrupt controllers. Providing this map in every driver is cumbersome.
Let's add this in the device tree and document the properties to map the
interrupt specifiers
Signed-off-by: Lina Iyer <ilina@xxxxxxxxxxxxxx>
---
Changes in v4:
- Added this documentation
---
.../interrupt-controller/interrupts.txt | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
index 8a3c40829899..917b598317f5 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
@@ -108,3 +108,42 @@ commonly used:
sensitivity = <7>;
};
};
+
+3) Interrupt wakeup parent
+--------------------------
+
+Some interrupt controllers in a SoC, are always powered on and have a select
+interrupts routed to them, so that they can wakeup the SoC from suspend. These
+interrupt controllers do not fall into the category of a parent interrupt
+controller and can be specified by the "wakeup-parent" property and contain a
+single phandle referring to the wakeup capable interrupt controller.
+
+ Example:
+ wakeup-parent = <&pdc_intc>;
+
+
+4) Interrupt mapping
+--------------------
+
+Sometimes interrupts may be detected by more than one interrupt controller
+(depending on which controller is active). The interrupt controllers may not
+be in hierarchy and therefore the interrupt controller driver is required to
+establish the relationship between the same interrupt at different interrupt
+controllers. If these interrupts are not sequential then a map needs to be
+specified to help identify these interrupts.
+
+Mapping the interrupt specifiers in the device tree can be done using the
+"irqdomain-map" property. The property contains interrupt specifier at the
+current interrupt controller followed by the interrupt specifier at the mapped
+interrupt controller.
+
+ irqdomain-map = <incoming-interrupt-specifier mapped-interrupt-specifier>
+
+The optional properties "irqdomain-map-mask" and "irqdomain-map-pass-thru" may
+be provided to help interpret the valid bits of the incoming and mapped
+interrupt specifiers respectively.
+
+ Example:
+ irqdomain-map = <22 0 &intc 36 0>, <24 0 &intc 37 0>;
+ irqdomain-map-mask = <0xff 0>;
+ irqdomain-map-pass-thru = <0 0xff>;
This doesn't quite explain how the mask and pass-thru properties are
used. I guess that the mask is used to define the 'useful bits' on the
incoming side, but pass-thru puzzles me. In your example, does it mean
that incoming lines map to outgoing interrupt <0 0>?
Sorry about the late reply.
How about this to go with the rest of the documentation -
In the above example, the input interrupt specifier map-mask <0xff 0> applied
on the incoming interrupt specifier of the map <22 0>, <24 0>, returns the
input interrupt 22, 24 etc. The second argument being irq type is immaterial
from the map and is used from the incoming request instead. The pass-thru
specifier parses the output interrupt specifier from the rest of the unparsed
argments from the map <&intc 36 0>, <&intc 37 0> etc to return the output
interrupt 36, 37 etc.
I think you need to add #interrupt-cells in your example, which is
otherwise hard to interpret.
Ok. Thanks, will add.
--Lina
