As specified in the SMC Calling Convention, each service call range of
function identifiers depends on the owner of such service call.
At the moment, these ranges are restricted to SiP (Silicon vendor
Providers).
The following commit extends the qcom_scm_call API to allow other
clients (ie. OEMs) to add new functions to the Qualcomm 64bit yielding
call interface.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>
---
drivers/firmware/qcom_scm-64.c | 48 ++++++++++++++++++----------------
1 file changed, 25 insertions(+), 23 deletions(-)
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index 688525dd4aee..b0194cb42765 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -75,12 +75,13 @@ static DEFINE_MUTEX(qcom_scm_lock);
* @dev: device
* @svc_id: service identifier
* @cmd_id: command identifier
+ * @owner: SMC owner
* @desc: Descriptor structure containing arguments and return values
*
* Sends a command to the SCM and waits for the command to finish processing.
* This should *only* be called in pre-emptible context.
*/
-static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
+static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id, u32 owner,
const struct qcom_scm_desc *desc,
struct arm_smccc_res *res)
{
@@ -129,8 +130,7 @@ static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
mutex_lock(&qcom_scm_lock);
cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL,
- qcom_smccc_convention,
- ARM_SMCCC_OWNER_SIP, fn_id);
+ qcom_smccc_convention, owner, fn_id);
quirk.state.a6 = 0;
@@ -215,7 +215,7 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
(ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
- &desc, &res);
+ ARM_SMCCC_OWNER_SIP, &desc, &res);
return ret ? : res.a1;
}
@@ -242,8 +242,8 @@ int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
desc.args[9] = req[4].val;
desc.arginfo = QCOM_SCM_ARGS(10);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, &desc,
- &res);
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
+ ARM_SMCCC_OWNER_SIP, &desc, &res);
*resp = res.a1;
return ret;
@@ -278,8 +278,8 @@ bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
desc.arginfo = QCOM_SCM_ARGS(1);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_IS_SUPPORTED_CMD,
- &desc, &res);
+ QCOM_SCM_PAS_IS_SUPPORTED_CMD, ARM_SMCCC_OWNER_SIP,
+ &desc, &res);
return ret ? false : !!res.a1;
}
@@ -296,7 +296,7 @@ int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_INIT_IMAGE_CMD,
- &desc, &res);
+ ARM_SMCCC_OWNER_SIP, &desc, &res);
return ret ? : res.a1;
}
@@ -314,7 +314,7 @@ int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
desc.arginfo = QCOM_SCM_ARGS(3);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MEM_SETUP_CMD,
- &desc, &res);
+ ARM_SMCCC_OWNER_SIP, &desc, &res);
return ret ? : res.a1;
}
@@ -329,8 +329,8 @@ int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
desc.arginfo = QCOM_SCM_ARGS(1);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
- &desc, &res);
+ QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
+ ARM_SMCCC_OWNER_SIP, &desc, &res);
return ret ? : res.a1;
}
@@ -345,7 +345,7 @@ int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
desc.arginfo = QCOM_SCM_ARGS(1);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_SHUTDOWN_CMD,
- &desc, &res);
+ ARM_SMCCC_OWNER_SIP, &desc, &res);
return ret ? : res.a1;
}
@@ -360,8 +360,8 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
desc.args[1] = 0;
desc.arginfo = QCOM_SCM_ARGS(2);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET, &desc,
- &res);
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET,
+ ARM_SMCCC_OWNER_SIP, &desc, &res);
return ret ? : res.a1;
}
@@ -377,7 +377,7 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
desc.arginfo = QCOM_SCM_ARGS(2);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_REMOTE_STATE,
- &desc, &res);
+ ARM_SMCCC_OWNER_SIP, &desc, &res);
return ret ? : res.a1;
}
@@ -403,7 +403,7 @@ int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
QCOM_SCM_VAL, QCOM_SCM_VAL);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
- QCOM_MEM_PROT_ASSIGN_ID,
+ QCOM_MEM_PROT_ASSIGN_ID, ARM_SMCCC_OWNER_SIP,
&desc, &res);
return ret ? : res.a1;
@@ -420,7 +420,7 @@ int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
desc.arginfo = QCOM_SCM_ARGS(2);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_RESTORE_SEC_CFG,
- &desc, &res);
+ ARM_SMCCC_OWNER_SIP, &desc, &res);
return ret ? : res.a1;
}
@@ -436,7 +436,8 @@ int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
desc.arginfo = QCOM_SCM_ARGS(1);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
- QCOM_SCM_IOMMU_SECURE_PTBL_SIZE, &desc, &res);
+ QCOM_SCM_IOMMU_SECURE_PTBL_SIZE,
+ ARM_SMCCC_OWNER_SIP, &desc, &res);
if (size)
*size = res.a1;
@@ -458,7 +459,8 @@ int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
QCOM_SCM_VAL);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
- QCOM_SCM_IOMMU_SECURE_PTBL_INIT, &desc, &res);
+ QCOM_SCM_IOMMU_SECURE_PTBL_INIT,
+ ARM_SMCCC_OWNER_SIP, &desc, &res);
/* the pg table has been initialized already, ignore the error */
if (ret == -EPERM)
@@ -477,7 +479,7 @@ int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
desc.arginfo = QCOM_SCM_ARGS(2);
return qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_DLOAD_MODE,
- &desc, &res);
+ ARM_SMCCC_OWNER_SIP, &desc, &res);
}
int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
@@ -491,7 +493,7 @@ int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
desc.arginfo = QCOM_SCM_ARGS(1);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_IO, QCOM_SCM_IO_READ,
- &desc, &res);
+ ARM_SMCCC_OWNER_SIP, &desc, &res);
if (ret >= 0)
*val = res.a1;
@@ -508,5 +510,5 @@ int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
desc.arginfo = QCOM_SCM_ARGS(2);
return qcom_scm_call(dev, QCOM_SCM_SVC_IO, QCOM_SCM_IO_WRITE,
- &desc, &res);
+ ARM_SMCCC_OWNER_SIP, &desc, &res);
}
--
2.21.0
