efficiency comes from downstream. The valid upstream property is
capacity-dmips-mhz but until we can come up with those numbers, remove
this property.
Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 8 --------
1 file changed, 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index ac25e9142cbd..0b6de0c29ee8 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -78,7 +78,6 @@
compatible = "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "arm,arch-cache";
@@ -97,7 +96,6 @@
compatible = "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L1_I_1: l1-icache {
compatible = "arm,arch-cache";
@@ -112,7 +110,6 @@
compatible = "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L1_I_2: l1-icache {
compatible = "arm,arch-cache";
@@ -127,7 +124,6 @@
compatible = "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L1_I_3: l1-icache {
compatible = "arm,arch-cache";
@@ -142,7 +138,6 @@
compatible = "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "arm,arch-cache";
@@ -161,7 +156,6 @@
compatible = "arm,armv8";
reg = <0x0 0x101>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L1_I_101: l1-icache {
compatible = "arm,arch-cache";
@@ -176,7 +170,6 @@
compatible = "arm,armv8";
reg = <0x0 0x102>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L1_I_102: l1-icache {
compatible = "arm,arch-cache";
@@ -191,7 +184,6 @@
compatible = "arm,armv8";
reg = <0x0 0x103>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L1_I_103: l1-icache {
compatible = "arm,arch-cache";
--
2.17.1
