This adds the gpio-ranges property so that the GPIO pins are initialized by the GPIO framework and not pinctrl. This fixes a circular dependency between these two frameworks so GPIO hogging can be used on this board. This was not tested on this particular hardware, however this same change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> --- arch/arm/boot/dts/qcom-apq8064.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index bd6907db615b..8ca89c79bd0e 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -714,6 +714,7 @@ interrupt-controller; #interrupt-cells = <2>; gpio-controller; + gpio-ranges = <&pm8921_gpio 0 0 44>; #gpio-cells = <2>; }; -- 2.20.1
