is_sensor_enabled() checks if the sensors are enabled on this platform.
It is possible that the SoC might choose not to enable all the sensors
that the IP block is capable of supporting.
Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
drivers/thermal/qcom/tsens-common.c | 14 ++++++++++++++
drivers/thermal/qcom/tsens-v0_1.c | 1 +
drivers/thermal/qcom/tsens-v2.c | 1 +
drivers/thermal/qcom/tsens.c | 5 +++++
drivers/thermal/qcom/tsens.h | 1 +
5 files changed, 22 insertions(+)
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 8d632de2c7f8..c58ba4c200bc 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -69,6 +69,20 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
}
}
+bool is_sensor_enabled(struct tsens_priv *priv, u32 hw_id)
+{
+ u32 val;
+ int ret;
+
+ if ((hw_id > (priv->num_sensors - 1)) || (hw_id < 0))
+ return -EINVAL;
+ ret = regmap_field_read(priv->rf[SENSOR_EN], &val);
+ if (ret)
+ return ret;
+
+ return val & (1 << hw_id);
+}
+
static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
{
int degc, num, den;
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 1c0428daa9c4..837e7872e512 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -332,6 +332,7 @@ const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = {
/* CTRL_OFFSET */
[TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0),
[TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1),
+ [SENSOR_EN] = REG_FIELD(SROT_CTRL_OFF, 3, 13),
/* ----- TM ------ */
/* UPPER_LOWER_INTERRUPT_CTRL */
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index e021b6dd2420..7346bfc9efe6 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -99,6 +99,7 @@ const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
/* CTRL_OFF */
[TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0),
[TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1),
+ [SENSOR_EN] = REG_FIELD(SROT_CTRL_OFF, 3, 18),
/* ----- TM ------ */
/* INTERRUPT ENABLE */
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 057b33353ba3..fc44cac31fa5 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -82,6 +82,11 @@ static int tsens_register(struct tsens_priv *priv)
struct thermal_zone_device *tzd;
for (i = 0; i < priv->num_sensors; i++) {
+ if (!is_sensor_enabled(priv, priv->sensor[i].hw_id)) {
+ dev_err(priv->dev, "sensor %d: disabled\n",
+ priv->sensor[i].hw_id);
+ continue;
+ }
priv->sensor[i].priv = priv;
priv->sensor[i].id = i;
tzd = devm_thermal_zone_of_sensor_register(priv->dev, i,
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index a93d14dee69b..023fed3352e3 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -362,6 +362,7 @@ char *qfprom_read(struct device *dev, const char *cname);
void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode);
int init_common(struct tsens_priv *priv);
int get_temp_common(struct tsens_priv *priv, int i, int *temp);
+bool is_sensor_enabled(struct tsens_priv *priv, u32 hw_id);
/* TSENS target */
extern const struct tsens_plat_data data_8960;
--
2.17.1
