Hi,
On Tue, Feb 26, 2019 at 3:54 PM Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> Hi,
>
> On Tue, Feb 5, 2019 at 9:13 PM Bjorn Andersson
> <bjorn.andersson@xxxxxxxxxx> wrote:
> >
> > From: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> >
> > This patch adds Q6V5 MSS remoteproc node for SDM845 SoCs.
> >
> > Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> > Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > ---
> >
> > Changes since v5:
> > - None
> >
> > arch/arm64/boot/dts/qcom/sdm845.dtsi | 58 ++++++++++++++++++++++++++++
> > 1 file changed, 58 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > index 560c16616ee6..5c41f6fe3e1b 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > @@ -1612,6 +1612,64 @@
> > };
> > };
> >
> > + mss_pil: remoteproc@4080000 {
> > + compatible = "qcom,sdm845-mss-pil";
> > + reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>;
> > + reg-names = "qdsp6", "rmb";
>
> I found that when I disabled IOMMU bypass by booting with
> "arm-smmu.disable_bypass=y" that I'd get this failure:
>
> ---
>
> [ 13.633776] qcom-q6v5-mss 4080000.remoteproc: MBA booted, loading mpss
> [ 13.647694] arm-smmu 15000000.iommu: Unexpected global fault, this
> could be serious
> [ 13.660278] arm-smmu 15000000.iommu: GFSR 0x80000002, GFSYNR0
> 0x00000000, GFSYNR1 0x00000781, GFSYNR2 0x00000000
> ...
> [ 14.648830] qcom-q6v5-mss 4080000.remoteproc: MPSS header
> authentication timed out
> [ 14.657141] qcom-q6v5-mss 4080000.remoteproc: port failed halt
> [ 14.664983] remoteproc remoteproc0: can't start rproc
> 4080000.remoteproc: -110
>
> ---
>
> Adding "iommus = <&apps_smmu 0x781 0>;" here fixed my problem. NOTE
> that I'm no expert on IOMMUs so you should confirm that this is right,
> but if it is then maybe you could include it in the next spin of the
> series? I got the "0x781" just by looking at the value of the GFSYNR1
> in the above splat. I wasn't sure what to put for the mask so I put
> 0x0.
Upon more testing the "iommus" line that I came up with avoids the
global fault but doesn't actually work. I just get:
qcom-q6v5-mss 4080000.remoteproc: failed to allocate mdt buffer
I'm hoping someone from Qualcomm can help out here and say how this
should be solved. Thanks!
-Doug
