Hi Florian
We have two slave DSA interfaces, wan0 and lan0, one is for wan port,
and the other is for lan port. Customer has it's mac address pool, they
want
to assign the mac address from the pool on wan0, lan0, and other
interfaces like
wifi, bt. Coreboot/uboot will populate it to the DTS node, so the driver
can
get it from it's node. For DSA slave interface, it already has it's own
DTS node, it's
easy to just add one porperty "local-mac-address" there for the usage in
DSA driver.
If not use DSA framework, normally we will use eth0.x and eth0.y for wan
and lan.
On this case, customer usually also assign the MAC address on these
logical interface
from it's pool.
On 2019-02-22 23:43, Florian Fainelli wrote:
On 2/22/19 4:58 AM, Vinod Koul wrote:
From: Xiaofei Shen <xiaofeis@xxxxxxxxxxxxxx>
Before creating a slave netdevice, get the mac address from DTS and
apply in case it is valid.
Can you explain your use case in details?
Assigning a MAC address to a network device that represents a switch
port does not quite make sense in general. The switch port is really
representing one end of a pipe, so one side you have stations and on
the
other side, you have the CPU/management Ethernet MAC controller's MAC
address which constitutes a station as well. The DSA slave network
devices are just software constructs meant to steer traffic towards
specific ports of the switch, but they are all from the perpsective of
traffic reaching the CPU Port in the first place, therefore traffic
that
is generally a known unicast Ethernet frame with the CPU's MAC address
as MAC DA (and of course all types of unknown MC, management traffic
etc.)
By default, DSA switch need to come up in a configuration where all
ports (except CPU/management) must be strictly separate from every
other
port such that we can achieve what a standalone Ethernet NIC would do.
This works because all ports are isolated from one another, so there is
no cross talk and so having the same MAC address (the one from the CPU)
on the DSA slave network devices just works, each port is a separate
broadcast domain.
Once you start bridging one or ore ports, the bridge root port will
have
a MAC address, most likely the one the CPU/management Ethernet MAC, but
similarly, this is not an issue and that's exactly how a software
bridge
would work as well.
Signed-off-by: Xiaofei Shen <xiaofeis@xxxxxxxxxxxxxx>
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
include/net/dsa.h | 1 +
net/dsa/dsa2.c | 1 +
net/dsa/slave.c | 5 ++++-
3 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index b3eefe8e18fd..aa24ce756679 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -198,6 +198,7 @@ struct dsa_port {
unsigned int index;
const char *name;
const struct dsa_port *cpu_dp;
+ const char *mac;
struct device_node *dn;
unsigned int ageing_time;
u8 stp_state;
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index a1917025e155..afb7d9fa42f6 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -261,6 +261,7 @@ static int dsa_port_setup(struct dsa_port *dp)
int err = 0;
memset(&dp->devlink_port, 0, sizeof(dp->devlink_port));
+ dp->mac = of_get_mac_address(dp->dn);
if (dp->type != DSA_PORT_TYPE_UNUSED)
err = devlink_port_register(ds->devlink, &dp->devlink_port,
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index a3fcc1d01615..8e64c4e947c6 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1308,7 +1308,10 @@ int dsa_slave_create(struct dsa_port *port)
slave_dev->features = master->vlan_features | NETIF_F_HW_TC;
slave_dev->hw_features |= NETIF_F_HW_TC;
slave_dev->ethtool_ops = &dsa_slave_ethtool_ops;
- eth_hw_addr_inherit(slave_dev, master);
+ if (port->mac && is_valid_ether_addr(port->mac))
+ ether_addr_copy(slave_dev->dev_addr, port->mac);
+ else
+ eth_hw_addr_inherit(slave_dev, master);
slave_dev->priv_flags |= IFF_NO_QUEUE;
slave_dev->netdev_ops = &dsa_slave_netdev_ops;
slave_dev->switchdev_ops = &dsa_slave_switchdev_ops;
