Re: [PATCH v1 21/24] drivers: thermal: tsens: Add generic support for TSENS v1 IP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 07, 2019 at 04:19:39PM +0530, Amit Kucheria wrote:
> qcs404 has a single TSENS IP block with 10 sensors. It uses version 1.4
> of the TSENS IP, functionality for which is encapsulated inside the
> qcom,tsens-v1 compatible.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> ---
>  drivers/thermal/qcom/Makefile   |   4 +-
>  drivers/thermal/qcom/tsens-v1.c | 229 ++++++++++++++++++++++++++++++++
>  drivers/thermal/qcom/tsens.c    |   3 +
>  drivers/thermal/qcom/tsens.h    |   3 +
>  4 files changed, 238 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/thermal/qcom/tsens-v1.c
> 
> diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
> index 7fa3cadce760..fc6fe50cdde4 100644
> --- a/drivers/thermal/qcom/Makefile
> +++ b/drivers/thermal/qcom/Makefile
> @@ -1,3 +1,5 @@
>  obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
> -qcom_tsens-y			+= tsens.o tsens-common.o tsens-v0_1.o tsens-8960.o tsens-v2.o
> +
> +qcom_tsens-y			+= tsens.o tsens-common.o tsens-v0_1.o \
> +				   tsens-8960.o tsens-v2.o tsens-v1.o
>  obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o
> diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
> new file mode 100644
> index 000000000000..417e2c2de1a1
> --- /dev/null
> +++ b/drivers/thermal/qcom/tsens-v1.c
> @@ -0,0 +1,229 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019, Linaro Limited
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/regmap.h>
> +#include <linux/delay.h>
> +#include "tsens.h"
> +
> +/* ----- SROT ------ */
> +#define SROT_HW_VER_OFF	0x0000
> +#define SROT_CTRL_OFF		0x0004
> +
> +/* ----- TM ------ */
> +#define TM_INT_EN_OFF				0x0000
> +#define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF	0x0004
> +#define TM_Sn_STATUS_OFF			0x0044
> +#define TM_TRDY_OFF				0x0084
> +
> +/* eeprom layout data for qcs404/405 (v1) */
> +#define BASE0_MASK	0x000007f8
> +#define BASE1_MASK	0x0007f800
> +#define BASE0_SHIFT	3
> +#define BASE1_SHIFT	11
> +
> +#define S0_P1_MASK	0x0000003f
> +#define S1_P1_MASK	0x0003f000
> +#define S2_P1_MASK	0x3f000000
> +#define S3_P1_MASK	0x000003f0
> +#define S4_P1_MASK	0x003f0000
> +#define S5_P1_MASK	0x0000003f
> +#define S6_P1_MASK	0x0003f000
> +#define S7_P1_MASK	0x3f000000
> +#define S8_P1_MASK	0x000003f0
> +#define S9_P1_MASK	0x003f0000
> +
> +#define S0_P2_MASK	0x00000fc0
> +#define S1_P2_MASK	0x00fc0000
> +#define S2_P2_MASK_1_0	0xc0000000
> +#define S2_P2_MASK_5_2	0x0000000f
> +#define S3_P2_MASK	0x0000fc00
> +#define S4_P2_MASK	0x0fc00000
> +#define S5_P2_MASK	0x00000fc0
> +#define S6_P2_MASK	0x00fc0000
> +#define S7_P2_MASK_1_0	0xc0000000
> +#define S7_P2_MASK_5_2	0x0000000f
> +#define S8_P2_MASK	0x0000fc00
> +#define S9_P2_MASK	0x0fc00000
> +
> +#define S0_P1_SHIFT	0
> +#define S0_P2_SHIFT	6
> +#define S1_P1_SHIFT	12
> +#define S1_P2_SHIFT	18
> +#define S2_P1_SHIFT	24
> +#define S2_P2_SHIFT_1_0	30
> +
> +#define S2_P2_SHIFT_5_2	0
> +#define S3_P1_SHIFT	4
> +#define S3_P2_SHIFT	10
> +#define S4_P1_SHIFT	16
> +#define S4_P2_SHIFT	22
> +
> +#define S5_P1_SHIFT	0
> +#define S5_P2_SHIFT	6
> +#define S6_P1_SHIFT	12
> +#define S6_P2_SHIFT	18
> +#define S7_P1_SHIFT	24
> +#define S7_P2_SHIFT_1_0	30
> +
> +#define S7_P2_SHIFT_5_2	0
> +#define S8_P1_SHIFT	4
> +#define S8_P2_SHIFT	10
> +#define S9_P1_SHIFT	16
> +#define S9_P2_SHIFT	22
> +
> +#define CAL_SEL_MASK	7

Why not using the macros on bits.h?

> +#define CAL_SEL_SHIFT	0
> +
> +static int calibrate_v1(struct tsens_priv *priv)
> +{
> +	u32 base0 = 0, base1 = 0;
> +	u32 p1[10], p2[10];
> +	u32 mode = 0, lsb = 0, msb = 0;
> +	u32 *qfprom_cdata;
> +	int i;
> +
> +	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
> +	if (IS_ERR(qfprom_cdata))
> +		return PTR_ERR(qfprom_cdata);
> +
> +	mode = (qfprom_cdata[4] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
> +	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
> +
> +	switch (mode) {
> +	case TWO_PT_CALIB:
> +		base1 = (qfprom_cdata[4] & BASE1_MASK) >> BASE1_SHIFT;
> +		p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
> +		p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
> +		/* This value is split over two registers, 2 bits and 4 bits */
> +		lsb   = (qfprom_cdata[0] & S2_P2_MASK_1_0) >> S2_P2_SHIFT_1_0;
> +		msb   = (qfprom_cdata[1] & S2_P2_MASK_5_2) >> S2_P2_SHIFT_5_2;
> +		p2[2] = msb << 2 | lsb;
> +		p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
> +		p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
> +		p2[5] = (qfprom_cdata[2] & S5_P2_MASK) >> S5_P2_SHIFT;
> +		p2[6] = (qfprom_cdata[2] & S6_P2_MASK) >> S6_P2_SHIFT;
> +		/* This value is split over two registers, 2 bits and 4 bits */
> +		lsb   = (qfprom_cdata[2] & S7_P2_MASK_1_0) >> S7_P2_SHIFT_1_0;
> +		msb   = (qfprom_cdata[3] & S7_P2_MASK_5_2) >> S7_P2_SHIFT_5_2;
> +		p2[7] = msb << 2 | lsb;
> +		p2[8] = (qfprom_cdata[3] & S8_P2_MASK) >> S8_P2_SHIFT;
> +		p2[9] = (qfprom_cdata[3] & S9_P2_MASK) >> S9_P2_SHIFT;
> +		for (i = 0; i < priv->num_sensors; i++)
> +			p2[i] = ((base1 + p2[i]) << 2);
> +		/* Fall through */
> +	case ONE_PT_CALIB2:
> +		base0 = (qfprom_cdata[4] & BASE0_MASK) >> BASE0_SHIFT;
> +		p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
> +		p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
> +		p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
> +		p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
> +		p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
> +		p1[5] = (qfprom_cdata[2] & S5_P1_MASK) >> S5_P1_SHIFT;
> +		p1[6] = (qfprom_cdata[2] & S6_P1_MASK) >> S6_P1_SHIFT;
> +		p1[7] = (qfprom_cdata[2] & S7_P1_MASK) >> S7_P1_SHIFT;
> +		p1[8] = (qfprom_cdata[3] & S8_P1_MASK) >> S8_P1_SHIFT;
> +		p1[9] = (qfprom_cdata[3] & S9_P1_MASK) >> S9_P1_SHIFT;
> +		for (i = 0; i < priv->num_sensors; i++)
> +			p1[i] = (((base0) + p1[i]) << 2);
> +		break;
> +	default:
> +		for (i = 0; i < priv->num_sensors; i++) {
> +			p1[i] = 500;
> +			p2[i] = 780;
> +		}
> +		break;
> +	}
> +
> +	compute_intercept_slope(priv, p1, p2, mode);
> +
> +	return 0;
> +}
> +
> +/* v1.x: qcs404,405 */
> +
> +const struct tsens_features tsens_v1_feat = {
> +	.ver_info	= 1,
> +	.crit_int	= 0,
> +	.adc		= 1,
> +	.srot_split	= 1,
> +	.max_sensors	= 11,
> +};
> +
> +const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
> +	/* ----- SROT ------ */
> +	/* VERSION */
> +	[VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31),
> +	[VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27),
> +	[VER_STEP]  = REG_FIELD(SROT_HW_VER_OFF,  0, 15),
> +	/* CTRL_OFFSET */
> +	[TSENS_EN]     = REG_FIELD(SROT_CTRL_OFF, 0,  0),
> +	[TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1,  1),
> +	[SENSOR_EN]    = REG_FIELD(SROT_CTRL_OFF, 3, 13),
> +
> +	/* ----- TM ------ */
> +	/* UPPER_LOWER_INTERRUPT_CTRL */
> +	[INT_EN]     = REG_FIELD(TM_INT_EN_OFF, 0, 0),
> +	/* Sn_UPPER_LOWER_STATUS_CTRL */
> +	REG_BANK(LOW_THRESH,  0, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF,       0,  9),
> +	REG_BANK(LOW_THRESH,  1, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF +  4,  0,  9),
> +	REG_BANK(LOW_THRESH,  2, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF +  8,  0,  9),
> +	REG_BANK(LOW_THRESH,  3, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 12,  0,  9),
> +	REG_BANK(LOW_THRESH,  4, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 16,  0,  9),
> +	REG_BANK(LOW_THRESH,  5, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 20,  0,  9),
> +	REG_BANK(LOW_THRESH,  6, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 24,  0,  9),
> +	REG_BANK(LOW_THRESH,  7, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 28,  0,  9),
> +	REG_BANK(LOW_THRESH,  8, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 32,  0,  9),
> +	REG_BANK(LOW_THRESH,  9, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 36,  0,  9),
> +	REG_BANK(LOW_THRESH, 10, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 40,  0,  9),
> +	REG_BANK(UP_THRESH,   0, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF,      10, 19),
> +	REG_BANK(UP_THRESH,   1, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF +  4, 10, 19),
> +	REG_BANK(UP_THRESH,   2, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF +  8, 10, 19),
> +	REG_BANK(UP_THRESH,   3, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 12, 10, 19),
> +	REG_BANK(UP_THRESH,   4, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 16, 10, 19),
> +	REG_BANK(UP_THRESH,   5, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 20, 10, 19),
> +	REG_BANK(UP_THRESH,   6, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 24, 10, 19),
> +	REG_BANK(UP_THRESH,   7, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 28, 10, 19),
> +	REG_BANK(UP_THRESH,   8, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 32, 10, 19),
> +	REG_BANK(UP_THRESH,   9, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 36, 10, 19),
> +	REG_BANK(UP_THRESH,  10, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 40, 10, 19),
> +	/* Sn_STATUS */
> +	REG_BANK(LAST_TEMP,  0, TM_Sn_STATUS_OFF,       0, 9),
> +	REG_BANK(LAST_TEMP,  1, TM_Sn_STATUS_OFF +  4,  0, 9),
> +	REG_BANK(LAST_TEMP,  2, TM_Sn_STATUS_OFF +  8,  0, 9),
> +	REG_BANK(LAST_TEMP,  3, TM_Sn_STATUS_OFF + 12,  0, 9),
> +	REG_BANK(LAST_TEMP,  4, TM_Sn_STATUS_OFF + 16,  0, 9),
> +	REG_BANK(LAST_TEMP,  5, TM_Sn_STATUS_OFF + 20,  0, 9),
> +	REG_BANK(LAST_TEMP,  6, TM_Sn_STATUS_OFF + 24,  0, 9),
> +	REG_BANK(LAST_TEMP,  7, TM_Sn_STATUS_OFF + 28,  0, 9),
> +	REG_BANK(LAST_TEMP,  8, TM_Sn_STATUS_OFF + 32,  0, 9),
> +	REG_BANK(LAST_TEMP,  9, TM_Sn_STATUS_OFF + 36,  0, 9),
> +	REG_BANK(LAST_TEMP, 10, TM_Sn_STATUS_OFF + 40,  0, 9),
> +	REG_BANK(VALID,      0, TM_Sn_STATUS_OFF,      14, 14),
> +	REG_BANK(VALID,      1, TM_Sn_STATUS_OFF +  4, 14, 14),
> +	REG_BANK(VALID,      2, TM_Sn_STATUS_OFF +  8, 14, 14),
> +	REG_BANK(VALID,      3, TM_Sn_STATUS_OFF + 12, 14, 14),
> +	REG_BANK(VALID,      4, TM_Sn_STATUS_OFF + 16, 14, 14),
> +	REG_BANK(VALID,      5, TM_Sn_STATUS_OFF + 20, 14, 14),
> +	REG_BANK(VALID,      6, TM_Sn_STATUS_OFF + 24, 14, 14),
> +	REG_BANK(VALID,      7, TM_Sn_STATUS_OFF + 28, 14, 14),
> +	REG_BANK(VALID,      8, TM_Sn_STATUS_OFF + 32, 14, 14),
> +	REG_BANK(VALID,      9, TM_Sn_STATUS_OFF + 36, 14, 14),
> +	REG_BANK(VALID,     10, TM_Sn_STATUS_OFF + 40, 14, 14),
> +	/* TRDY */
> +	[TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
> +};
> +
> +static const struct tsens_ops ops_generic_v1 = {
> +	.init		= init_common,
> +	.calibrate	= calibrate_v1,
> +	.get_temp	= get_temp_tsens_valid,
> +};
> +
> +const struct tsens_plat_data data_tsens_v1 = {
> +	.ops		= &ops_generic_v1,
> +	.feat		= &tsens_v1_feat,
> +	.fields	= tsens_v1_regfields,
> +};
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index fc44cac31fa5..36b0b52db524 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -63,6 +63,9 @@ static const struct of_device_id tsens_table[] = {
>  	}, {
>  		.compatible = "qcom,msm8996-tsens",
>  		.data = &data_8996,
> +	}, {
> +		.compatible = "qcom,tsens-v1",
> +		.data = &data_tsens_v1,
>  	}, {
>  		.compatible = "qcom,tsens-v2",
>  		.data = &data_tsens_v2,
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index 4b3d71b26c97..4ed07e607cbc 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -265,6 +265,9 @@ extern const struct tsens_plat_data data_8960;
>  /* TSENS v0.1 targets */
>  extern const struct tsens_plat_data data_8916, data_8974;
>  
> +/* TSENS v1 targets */
> +extern const struct tsens_plat_data data_tsens_v1;
> +
>  /* TSENS v2 targets */
>  extern const struct tsens_plat_data data_8996, data_tsens_v2;
>  
> -- 
> 2.17.1
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux