Re: [PATCH] PCI: qcom: Don't deassert reset GPIO during probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed 13 Feb 07:23 PST 2019, Lorenzo Pieralisi wrote:

> On Fri, Jan 25, 2019 at 03:26:16PM -0800, Bjorn Andersson wrote:
> > Acquiring the reset GPIO low means that reset is being deasserted, this
> > is followed almost immediately with qcom_pcie_host_init() asserting it,
> > initializing it and then finally deasserting it again, for the link to
> > come up.
> > 
> > Some PCIe devices requires a minimum time between the initial deassert
> > and subsequent reset cycles. In a platform that boots with the reset
> > GPIO asserted this requirement is being violated by this deassert/assert
> > pulse.
> > 
> > Acquiring the reset GPIO high will prevent this by matching the state to
> > the subsequent asserted state.
> > 
> > Cc: stable@xxxxxxxxxxxxxxx
> 
> Missing Fixes: tag, please provide me one so that I can proceed.
> 

This applies to the original commit introducing this driver, so:

Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")

Regards,
Bjorn



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux