On Thu, 31 Jan 2019 at 17:54, Sai Prakash Ranjan
<saiprakash.ranjan@xxxxxxxxxxxxxx> wrote:
>
> From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
>
> Enable coresight support by adding device nodes for the
> available source, sinks and channel blocks on msm8996.
>
> This also adds coresight cpu debug nodes.
>
> Signed-off-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 434 ++++++++++++++++++++++++++
> 1 file changed, 434 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 99b7495455a6..3406a10f40db 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -429,6 +429,440 @@
> reg = <0x300000 0x90000>;
> };
>
> + stm@3002000 {
> + compatible = "arm,coresight-stm", "arm,primecell";
> + reg = <0x3002000 0x1000>,
> + <0x8280000 0x180000>;
> + reg-names = "stm-base", "stm-stimulus-base";
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + out-ports {
> + port {
> + stm_out: endpoint {
> + remote-endpoint =
> + <&funnel0_in>;
> + };
> + };
> + };
> + };
> +
> + tpiu@3020000 {
> + compatible = "arm,coresight-tpiu", "arm,primecell";
> + reg = <0x3020000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + port {
> + tpiu_in: endpoint {
> + remote-endpoint =
> + <&replicator_out1>;
> + };
> + };
> + };
> + };
> +
> + funnel@3021000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x3021000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + port {
> + funnel0_in: endpoint {
> + remote-endpoint =
> + <&stm_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + funnel0_out: endpoint {
> + remote-endpoint =
> + <&merge_funnel_in0>;
> + };
> + };
> + };
> + };
> +
> + funnel@3022000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x3022000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + port {
> + funnel1_in: endpoint {
> + remote-endpoint =
> + <&apss_merge_funnel_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + funnel1_out: endpoint {
> + remote-endpoint =
> + <&merge_funnel_in1>;
> + };
> + };
> + };
> + };
> +
> + funnel@3025000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x3025000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + merge_funnel_in0: endpoint {
> + remote-endpoint =
> + <&funnel0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + merge_funnel_in1: endpoint {
> + remote-endpoint =
> + <&funnel1_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + merge_funnel_out: endpoint {
> + remote-endpoint =
> + <&etf_in>;
> + };
> + };
> + };
> + };
> +
> + replicator@3026000 {
> + compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
> + reg = <0x3026000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + port {
> + replicator_in: endpoint {
> + remote-endpoint =
> + <&etf_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + replicator_out0: endpoint {
> + remote-endpoint =
> + <&etr_in>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + replicator_out1: endpoint {
> + remote-endpoint =
> + <&tpiu_in>;
> + };
> + };
> + };
> + };
> +
> + etf@3027000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0x3027000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + port {
> + etf_in: endpoint {
> + remote-endpoint =
> + <&merge_funnel_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + etf_out: endpoint {
> + remote-endpoint =
> + <&replicator_in>;
> + };
> + };
> + };
> + };
> +
> + etr@3028000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0x3028000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> + arm,scatter-gather;
> +
> + in-ports {
> + port {
> + etr_in: endpoint {
> + remote-endpoint =
> + <&replicator_out0>;
> + };
> + };
> + };
> + };
> +
> + debug@3810000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0x3810000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU0>;
> + };
> +
> + etm@3840000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x3840000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + cpu = <&CPU0>;
> +
> + out-ports {
> + port {
> + etm0_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel0_in0>;
> + };
> + };
> + };
> + };
> +
> + debug@3910000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0x3910000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU1>;
> + };
> +
> + etm@3940000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x3940000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + cpu = <&CPU1>;
> +
> + out-ports {
> + port {
> + etm1_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel0_in1>;
> + };
> + };
> + };
> + };
> +
> + funnel@39b0000 { /* APSS Funnel 0 */
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x39b0000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + apss_funnel0_in0: endpoint {
> + remote-endpoint = <&etm0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + apss_funnel0_in1: endpoint {
> + remote-endpoint = <&etm1_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + apss_funnel0_out: endpoint {
> + remote-endpoint =
> + <&apss_merge_funnel_in0>;
> + };
> + };
> + };
> + };
> +
> + debug@3a10000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0x3a10000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU2>;
> + };
> +
> + etm@3a40000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x3a40000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + cpu = <&CPU2>;
> +
> + out-ports {
> + port {
> + etm2_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel1_in0>;
> + };
> + };
> + };
> + };
> +
> + debug@3b10000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0x3b10000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU3>;
> + };
> +
> + etm@3b40000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x3b40000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + cpu = <&CPU3>;
> +
> + out-ports {
> + port {
> + etm3_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel1_in1>;
> + };
> + };
> + };
> + };
> +
> + funnel@3bb0000 { /* APSS Funnel 1 */
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x3bb0000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + apss_funnel1_in0: endpoint {
> + remote-endpoint = <&etm2_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + apss_funnel1_in1: endpoint {
> + remote-endpoint = <&etm3_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + apss_funnel1_out: endpoint {
> + remote-endpoint =
> + <&apss_merge_funnel_in1>;
> + };
> + };
> + };
> + };
> +
> + funnel@3bc0000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x3bc0000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + apss_merge_funnel_in0: endpoint {
> + remote-endpoint =
> + <&apss_funnel0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + apss_merge_funnel_in1: endpoint {
> + remote-endpoint =
> + <&apss_funnel1_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + apss_merge_funnel_out: endpoint {
> + remote-endpoint =
> + <&funnel1_in>;
> + };
> + };
> + };
> + };
> +
Normally you'd want to have two seperate patches for coresight and
cpu-debug but that is up up to the David and Andy to decide.
Reviewed-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> kryocc: clock-controller@6400000 {
> compatible = "qcom,apcc-msm8996";
> reg = <0x6400000 0x90000>;
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
