Re: [PATCH] ARM: dts: qcom: ipq4019: Fix MSI IRQ type

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu 24 Jan 05:00 PST 2019, Niklas Cassel wrote:

> The databook clearly states that the MSI IRQ (msi_ctrl_int) is a level
> triggered interrupt.
> 
> The msi_ctrl_int will be high for as long as any MSI status bit is set,
> thus the IRQ type should be set to IRQ_TYPE_LEVEL_HIGH, causing the
> IRQ handler to keep getting called, as long as any MSI status bit is set.
> 
> A git grep shows that ipq4019 is the only SoC using snps,dw-pcie that has
> configured this IRQ incorrectly.
> 
> Not having the correct IRQ type defined will cause us to lose interrupts,
> which in turn causes timeouts in the PCIe endpoint drivers.
> 
> Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxxxx>

Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> ---
>  arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> index 19635f91e2c4..48b3cb474ba0 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> @@ -398,7 +398,7 @@
>  			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
>  				  0x82000000 0 0x40300000 0x40300000 0 0x400000>;
>  
> -			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
> +			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "msi";
>  			#interrupt-cells = <1>;
>  			interrupt-map-mask = <0 0 0 0x7>;
> -- 
> 2.20.1
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux