From: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
This patch adds Q6V5 MSS remoteproc node for SDM845 SoCs.
Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
Changes since v3:
- Fixed sort order in /soc
arch/arm64/boot/dts/qcom/sdm845.dtsi | 58 ++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 24c30be974bf..eb02c39d2048 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1618,6 +1618,64 @@
};
};
+ mss_pil: remoteproc@4080000 {
+ compatible = "qcom,sdm845-mss-pil";
+ reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended =
+ <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
+ <&gcc GCC_MSS_SNOC_AXI_CLK>,
+ <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+ <&gcc GCC_PRNG_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "bus", "mem", "gpll0_mss",
+ "snoc_axi", "mnoc_axi", "prng", "xo";
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+ <&pdc_reset PDC_MODEM_SYNC_RESET>;
+ reset-names = "mss_restart", "pdc_reset";
+
+ qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+
+ power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
+ <&rpmhpd SDM845_CX>,
+ <&rpmhpd SDM845_MX>,
+ <&rpmhpd SDM845_MSS>;
+ power-domain-names = "load_state", "cx", "mx", "mss";
+
+ mba {
+ memory-region = <&mba_region>;
+ };
+
+ mpss {
+ memory-region = <&mpss_region>;
+ };
+
+ glink-edge {
+ interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+ label = "modem";
+ qcom,remote-pid = <1>;
+ mboxes = <&apss_shared 12>;
+ };
+ };
+
gpucc: clock-controller@5090000 {
compatible = "qcom,sdm845-gpucc";
reg = <0 0x05090000 0 0x9000>;
--
2.18.0
