On 28/01/2019 07:41, Amit Kucheria wrote:
> Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to
> automatically register as a thermal cooling device.
>
> This allows removal of boiler plate code from the driver.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
Reviewed-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> ---
> drivers/cpufreq/imx6q-cpufreq.c | 24 ++----------------------
> 1 file changed, 2 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
> index 9fedf627e000..9935df234fa1 100644
> --- a/drivers/cpufreq/imx6q-cpufreq.c
> +++ b/drivers/cpufreq/imx6q-cpufreq.c
> @@ -9,7 +9,6 @@
> #include <linux/clk.h>
> #include <linux/cpu.h>
> #include <linux/cpufreq.h>
> -#include <linux/cpu_cooling.h>
> #include <linux/err.h>
> #include <linux/module.h>
> #include <linux/nvmem-consumer.h>
> @@ -52,7 +51,6 @@ static struct clk_bulk_data clks[] = {
> };
>
> static struct device *cpu_dev;
> -static struct thermal_cooling_device *cdev;
> static bool free_opp;
> static struct cpufreq_frequency_table *freq_table;
> static unsigned int max_freq;
> @@ -193,16 +191,6 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
> return 0;
> }
>
> -static void imx6q_cpufreq_ready(struct cpufreq_policy *policy)
> -{
> - cdev = of_cpufreq_cooling_register(policy);
> -
> - if (!cdev)
> - dev_err(cpu_dev,
> - "running cpufreq without cooling device: %ld\n",
> - PTR_ERR(cdev));
> -}
> -
> static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
> {
> int ret;
> @@ -214,22 +202,14 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
> return ret;
> }
>
> -static int imx6q_cpufreq_exit(struct cpufreq_policy *policy)
> -{
> - cpufreq_cooling_unregister(cdev);
> -
> - return 0;
> -}
> -
> static struct cpufreq_driver imx6q_cpufreq_driver = {
> - .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
> + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK |
> + CPUFREQ_AUTO_REGISTER_COOLING_DEV,
> .verify = cpufreq_generic_frequency_table_verify,
> .target_index = imx6q_set_target,
> .get = cpufreq_generic_get,
> .init = imx6q_cpufreq_init,
> - .exit = imx6q_cpufreq_exit,
> .name = "imx6q-cpufreq",
> - .ready = imx6q_cpufreq_ready,
> .attr = cpufreq_generic_attr,
> .suspend = cpufreq_generic_suspend,
> };
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
