Hi Suzuki, On 1/24/2019 4:49 PM, Suzuki K Poulose wrote:
Hi Sai, That looks fine with me. But as Mathieu said, this needs to be a separate patch. But before all that please could you provide me the PIDR4 value for the Kryo A75 and A55 please ?
Sure. PIDR4 value is 0x4. I get it now. So we are looking for JEP106 identification(PIDR1[7:4] and PIDR2[2:0]) and continuation code(PIDR4[3:0]). From ARM Coresight Spec: DES_0, PIDR1 bits[7:4] JEP106 identification code bits[3:0]. DES_1, PIDR2 bits[2:0] JEP106 identification code bits[6:4]. DES_2, PIDR4 bits[3:0] JEP106 continuation code. For SDM845(A75 based): *0xB_B8_03* does indicate that the JEP106 identification code is 0x3B and continuation code is 0x4 which is of ARM and not QCOM(JEP106 ID is 0x70) which is expected. And the other values of PIDR0[0:7] and PIDR1[3:0] are *Implementation defined part numbers* and can be different from ARM A75/A55. I think this clears up case for SDM845. As for MSM8996, it is not based on any ARM derivative and hence the JEP106 ID is of QCOM(0x70) from the value of pid = *0xF_02_11* based on PIDR1[7:4] and PIDR2[2:0]. This clears this as well. Please correct me if I am wrong and also let me know if I can continue with PID addition to table. Thanks, Sai -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
