Re: [PATCH v3 03/10] arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Jan 22, 2019 at 4:26 PM Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
> > > +               clocks = <&xo_board>;
> > > +               clock-names = "xo";
> >
> > I've found that nearly all the places that refer to xo_board are wrong
> > and should actually point to '<&rpmhcc RPMH_CXO_CLK>'.  Maybe yours
> > should too?
> >
>
> Yes, xo_board is a fake clock representing the 19.2MHz clock feeding the
> cxo (or cxo2) pad of the SoC. So you're definitely right in that this
> should be referencing the actual 19.2MHz clock.
>
> We've kept referring to this as xo_board, as we don't handle probe
> deferral when gcc will probe earlier than rpmcc in the boot and for
> other non-clock drivers the fear of actually hitting 0 on the refcounter
> for this (you don't want to disable the cxo while running the system).

Note that, as defined in the device tree, "xo_board" is actually 38.4.
IIUC that is not actually a fake/bogus clock but represents the actual
crystal on the board.  There's a divide by 2 in the CPU though so most
peripherals consider "xo" as 19.2.

...OK, confirmed.  The actual RF_XO_CLK pin on the board is truly
connected to 38.4.

-Doug



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux