[PATCH v3 1/1] arm64: dts: sdm845: wireup the thermal trip points to cpufreq

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since all cpus in the big and little clusters, respectively, are in the
same frequency domain, use all of them for mitigation in the
cooling-map. We end up with two cooling devices - one each for the big
and little clusters.

We throttle lightly at the first trip point, just removing the boost
frequency. At the next trip point we allow ourselves to be throttled to
any extent.

Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 225 +++++++++++++++++++++++++--
 1 file changed, 209 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index c27cbd3bcb0a..878f661d16eb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -99,6 +100,7 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
 			L2_0: l2-cache {
 				compatible = "cache";
@@ -114,6 +116,7 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_100>;
 			L2_100: l2-cache {
 				compatible = "cache";
@@ -126,6 +129,7 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_200>;
 			L2_200: l2-cache {
 				compatible = "cache";
@@ -138,6 +142,7 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_300>;
 			L2_300: l2-cache {
 				compatible = "cache";
@@ -150,6 +155,7 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x400>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_400>;
 			L2_400: l2-cache {
 				compatible = "cache";
@@ -162,6 +168,7 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x500>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_500>;
 			L2_500: l2-cache {
 				compatible = "cache";
@@ -174,6 +181,7 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_600>;
 			L2_600: l2-cache {
 				compatible = "cache";
@@ -186,6 +194,7 @@
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_700>;
 			L2_700: l2-cache {
 				compatible = "cache";
@@ -1691,18 +1700,41 @@
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
-				cpu_alert0: trip0 {
+				cpu0_alert1: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit0: trip1 {
+				cpu0_alert0: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 1>,
+							 <&CPU1 THERMAL_NO_LIMIT 1>,
+							 <&CPU2 THERMAL_NO_LIMIT 1>,
+							 <&CPU3 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu1-thermal {
@@ -1712,18 +1744,41 @@
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
-				cpu_alert1: trip0 {
+				cpu1_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit1: trip1 {
+				cpu1_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 1>,
+							 <&CPU1 THERMAL_NO_LIMIT 1>,
+							 <&CPU2 THERMAL_NO_LIMIT 1>,
+							 <&CPU3 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu2-thermal {
@@ -1733,18 +1788,41 @@
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				cpu_alert2: trip0 {
+				cpu2_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit2: trip1 {
+				cpu2_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 1>,
+							 <&CPU1 THERMAL_NO_LIMIT 1>,
+							 <&CPU2 THERMAL_NO_LIMIT 1>,
+							 <&CPU3 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu3-thermal {
@@ -1754,18 +1832,41 @@
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
-				cpu_alert3: trip0 {
+				cpu3_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit3: trip1 {
+				cpu3_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 1>,
+							 <&CPU1 THERMAL_NO_LIMIT 1>,
+							 <&CPU2 THERMAL_NO_LIMIT 1>,
+							 <&CPU3 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu4-thermal {
@@ -1775,18 +1876,41 @@
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
-				cpu_alert4: trip0 {
+				cpu4_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit4: trip1 {
+				cpu4_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT 1>,
+							 <&CPU5 THERMAL_NO_LIMIT 1>,
+							 <&CPU6 THERMAL_NO_LIMIT 1>,
+							 <&CPU7 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu4_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu5-thermal {
@@ -1796,18 +1920,41 @@
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
-				cpu_alert5: trip0 {
+				cpu5_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit5: trip1 {
+				cpu5_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT 1>,
+							 <&CPU5 THERMAL_NO_LIMIT 1>,
+							 <&CPU6 THERMAL_NO_LIMIT 1>,
+							 <&CPU7 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu5_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu6-thermal {
@@ -1817,18 +1964,41 @@
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
-				cpu_alert6: trip0 {
+				cpu6_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit6: trip1 {
+				cpu6_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT 1>,
+							 <&CPU5 THERMAL_NO_LIMIT 1>,
+							 <&CPU6 THERMAL_NO_LIMIT 1>,
+							 <&CPU7 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu6_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu7-thermal {
@@ -1838,18 +2008,41 @@
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				cpu_alert7: trip0 {
+				cpu7_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit7: trip1 {
+				cpu7_alert1: trip-point@1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT 1>,
+							 <&CPU5 THERMAL_NO_LIMIT 1>,
+							 <&CPU6 THERMAL_NO_LIMIT 1>,
+							 <&CPU7 THERMAL_NO_LIMIT 1>;
+				};
+				map1 {
+					trip = <&cpu7_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 };
-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux