This patch series contains following:
* Add wrapper framework to support interconnect path from GENI QUPs.
This wrapper enabled and help individual SEs to put their BW request.
Adding this wrapper make sense because we don't want individual SEs
to request to interconnect driver separately and put individual bw
votes from QUP.
This wrapper framework does the following:
- Request for interconnect path handle
- Maintain record of individual SEs' avg/peak bw.
- Aggregated avg/peak bw based on how many SE's are active and put
single bw request from QUP
* Interconnect wrapper API calling from I2C, SPI & Uart driver
* dt binding in sdm845 soc for Interconnect path for GENI QUPs
* dt binding documentation
Alok Chauhan (6):
dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
soc: qcom: Add wrapper to support for Interconnect path
i2c: i2c-qcom-geni: Add interconnect support
spi: spi-geni-qcom: Add interconnect support
tty: serial: qcom_geni_serial: Add interconnect support
arm64: dts: sdm845: Add interconnect for GENI QUP
.../devicetree/bindings/soc/qcom/qcom,geni-se.txt | 10 ++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 14 +++
drivers/i2c/busses/i2c-qcom-geni.c | 13 +++
drivers/soc/qcom/qcom-geni-se.c | 129 +++++++++++++++++++++
drivers/spi/spi-geni-qcom.c | 20 +++-
drivers/tty/serial/qcom_geni_serial.c | 27 ++++-
include/linux/qcom-geni-se.h | 11 ++
7 files changed, 222 insertions(+), 2 deletions(-)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
