Some Qualcomm SoCs sport a ethqos controller which use DW ip, so add the glue driver which uses stmmac driver along with DT bindings for this device. This controller supports rgmii mode and doesn't work with existing phy drivers as they do not remove the phy delay delay in this mode, so fix the two phy drivers tested with this. Changes in v3: - Add description in DT and rename the file and compatible as suggested by Rob - Update changelog for QCA8K driver - Update AT803x phy disable delay for all RGMxx modes Changes in v2: - Fix the example in dt-binding - Remove DT property for disable the delay and disable delay for RGMII mode in AT803x and QCA8K PHY drivers Vinod Koul (5): dt-bindings: net: Add Qualcomm ethqos binding net: stmmac: Add driver for Qualcomm ethqos MAINTAINER: Add entry for Qualcomm ETHQOS ethernet driver net: phy: at803x: Disable phy delay for RGMII mode net: dsa: qca8k: disable delay for RGMII mode .../devicetree/bindings/net/qcom,ethqos.txt | 64 ++ MAINTAINERS | 8 + drivers/net/dsa/qca8k.c | 16 +- drivers/net/ethernet/stmicro/stmmac/Kconfig | 10 + drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + .../stmicro/stmmac/dwmac-qcom-ethqos.c | 545 ++++++++++++++++++ drivers/net/phy/at803x.c | 22 +- 7 files changed, 644 insertions(+), 22 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/qcom,ethqos.txt create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c -- 2.20.1
